Search results for query: *

  1. V

    Transmission Guy in Maryland

    Speed Unlimited near Andrews Air Force Base - Camp Springs... Carry in your tranny ... Call them first to discuss your requirements, etc.
  3. V

    Any run hughes 904 ??

    Try John Cope of Cope Racing Transmissions - Mopar guy who is a sponsor on Moparts - builds a darn good tranny for a darn good price... Located in Indiana ...
  4. V

    904 to 727?

    I'm interested in replies from those that have made the 904 to 727 swap, while retaining the column shift. Are the column shifter linkages down low on the 904 different from the factory 727 linkage? What about kickdown linkages between the 904 and the 727? I have a 340 and a...
  5. V

    bolt in front suspension kits

    Try bigblockdart.com Bill Reilly has a front suspension system called Alterkation which is a great upgrade to the torsion bar setup. This setup is not cheap but replaces the K member, the torsion bars, etc. and is a bolt in. Rack and pinion steering is also included. Abodyjoe, a...
  6. V

    904 or 727

    First --- Love your '69 Dart! Since you are in the Midwest, a good tranny guy to check with would be John Cope of Cope Racing Transmissions. Google Cope Racing Transmissions for the internet site. Also try www.moparts.com for more info. John is a sponsor of several Mopar boards...
  8. V

    Oil leak out of the speedo cable mounting adapter on the tranny

    Guys thanks for the instructions. I will be getting this car up on stands and following your instructions soon.
  9. V

    Oil leak out of the speedo cable mounting adapter on the tranny

    I have a leak from the speedometer cable housing on the drivers side of my Torque Flite. Who has replaced the seals / o-ring setup on that, and what is involved (which parts are required) in the remove/replacement of those items? I vaguely recall that someone posted that it is best to jack...
  10. V

    727 -> 904

    I agree with Guitar. The 904 advantage is in the low - cost low gear set, and a little less rotating mass, but on the street -- I would take the 727. I have a 1971 Duster 340 that currently has a 904, and I just sold a 1969 340 Dart Swinger with a 727. Looking at the 727 on the...
  11. V

    Ford 8.8 Rear?

    A long time ago...I had a 1987 Mustang 5.0 notchback with the 3.07 8.8" and a 5 speed. The weak link in the rear is the pinion and the C-clips. The C-clips break when performing hard burn-outs with a sticky street slick under the car. At the prices quoted though, unless you intend to use...
Back
Top