Search results for query: *

I believe rubber...I acquired the parts a few years ago..[memory]..they are black in color if that makes any difference. I'll see if i can find the receipt.

GreetingS FABO! Working on memory here...I recently did the disc swap on my 65 Barracuda w/new bushings/balljoints. No front alignment yet. Alignment is "roughed" in. But after driving car and upon parking, the vehicle sorta "pops" when sitting still as if..[settling] is occuring..? Upon...

Well, i massaged it into optimum straightness!! Also, on a side-by-side comparison..with the bushing stop "knurls" placed side by side on each rod, the '74 Dart rod is longer...the knurls are a greater distance apart than the '65 Cuda by about 1/4" I ordered the bushings for the 65 Thanks...

H Fabo! I'm working on my 65 'Cuda disc brake swap from the '74 Dart parts car this weekend.....I noticed some curve in the lower control arm strut rod & thought about the '74 Dart. Those rods are straight but a tad [~.25"] longer between the bushing stops. Is this difference is acceptable...

The bars were spiffy clean & car had ~80 kmiles...I 'm gonna see how it feels with the new front end & then assess larger bars when I pursue the stabilizer bar set up. Thanks all!!

97.6 % just evening/morning tool around town & make some tire smoke and racket on the Occasion..upgrade/enhance the OE stuff..

Well, I'm lining up thoughts and parts on my upcoming disc brake swap...and on a "practice" dry run on the 74 Dart parts car, I used a homemade torsion bar removal tool to ascertain to difficulty of removing T bars. Then I got to thinking (if ok on fitment), I would clean/paint those T bars &...

Both are factory AC cars. I measured the '74 Dart & thought it was ~7/8"...will verify once thoroughness of cleaning is verified. What is the effect of putting a .87 bar in a car that has a .85 bar in it?

Are there any/what differences in Torsion bars on a '74 Dart with a 318 and a '65 Barracuda with a 273...? Thanks Fabo!

*Possibly brake hoses kinking in turn(s), warped rotors causing kick... Does the car shake any when in straight line slowing down <braking>?

Jack the car up about 4-5 inches....take tire tool/lever and apply force (lifting) at 6 oclock with tool just under tire. Keep other hand on tire at 12 oclock & feel for movement... Did you shake both sides w/the left-right movements?

Thank You Canadian Cuda. If there is an alignment "notch" on coupler that matches to notch on gearbox shaft, that would prevent 67 coupler from mating on "notchless" shaft, I suppose..? But on the gear box splined shaft, is the "notched" area just missing a spline that would allow an...

On my 65 Barracuda, manual steer, My gear box shaft appears to be 3/4"spline AND the steering shaft to be 3/4 smooth. The factory coupler has to go for the magnum manifold to fit. Now, I can't tell if it is36 spline on gear box shaft or not but is that what it's supposed to be? Will a...

And do my old eyes deceive me, but is the spline a 5/8" w/36 count?

Hate to be a pest, but off hand does any one know the effective diameter of the Flaming River steering coupler versus the Borgeson one? I thought I read the Borgeson was 1 1/2" .. 65 Barracuda manual steer Thanks fabo

Now that the days are getting longer, there is more sunshine in the evenings to look at the Mopar! On my 65 Fish, I've "test" fit my 92 Dakota manifold (left side) with .250 taken off of mounting flange AND the left motor mount raised about 1/2" to 5/8". There is sufficient room above manual...

so.. if you have a donor car, what "leaf' would you pick for height enhancement?

I'm slower than Congress, but learning...found this info..hope this can help someone.. Interchangeability between lower control arms on the Mopar cars It's where the sway bar mount tab is welded onto the LCA that would make a LCA year specific to that automobile. 1965 to 1972 LCA's have the...

Is the lower control arm off of a '74 Dart the same as a '65 Barracuda? My donor car (Dart) doesn't have the control arms with sway bar and was thinking about prepping them with tabs in advance for disc brake swap to fish. Also was concerned about exact placement of "tabs"...