Search results for query: *

I have backing plates and some misc spring hardware no spreader bars or drums

Probably because most of the 70's cars with 8 3/4 rears had 11" rear brakes, I am not sure I have seen one that didn't except for the original A body 8 3/4's that used special narrower brakes and drums

For 2.5 brakes the offset is the same, 11" brakes I used were 11X3. There is no standard Abody rear end with big bolt pattern you either have to re-drill the axles,or get custom axles. I used a station wagon rear and had it narrowed and the axles shortened and re-splined so I could use the...

The 8 3/4 rear from the donor station wagon that I had narrowed and the axles cut and re-splined had 11" brakes so that's what I used. Got to big bolt pattern and correct offset to center the bigger brakes and axles that way.

They will fit fine I had 14 " wheels when I built my rear end

Sorry I was out of town until today, what I have in the shed is 11" backing plates with some hardware. I thought there was some 10" stuff there but it must have been used up somewhere.

I will measure and let you know

I may have a set of 10" backing plates if your interested in pieces. Let me know and I'll verify the size for sure, I ended up going with 11".

bump

I am looking for a rear bumper for a 73 Swinger in good condition. If you have one let me know and we can discuss shipping arrangments or pick up. Thanks Phil

I am looking for a B&M 144 blower and manifold for small block mopar. complete set up would be preferred. PM me here or text 319-551-8880.

I have a decent used one.

More then likely it was bent before they started with it. Most places doing that operation will straighten the housing as part of the job. After 40 years most are bent slightly as they are after all fairly thin steel. A good drive line shop may be able to straighten it, it's not a difficult...

Am looking for a gauge cluster for a 74 dart. Something decent good driver condition. Thanks.

Am looking for a steering wheel for a 74 dart. Want black with a center button but would consider others just needs to be driver quality, something in decent shape. Have went to manual steering on sons car and little wheel just don't cut it anymore.

Still looking

I don't have a picture needs to be from a small block originally equipted with 4BBL carb. Need the bracket that holds the throttle cable that bolts onto the manifold.

I am looking for a small block 4BBL throttle cable bracket to convert from 2 to 4BBL carb. I have a 3 piece kickdown assy so I am mainly looking for the mounting bracket but would consider the whole assembly if someone did not want to separate.

PM sent

Am looking for a 7 1/4 sure grip unit. Anybody have one or seen one lately? Told a buddy of mine who is looking I would look around and see if I could round one up.

If your car is a strip or street strip machine you should get aftermarket axles, especially with a 4 speed. Now if your building a street only cruser that your not going to be racing with sticky tires or using a 4 speed you should be fine with a properly done respine job. I have seen lots of...

Just did a set a few months back $110 a pair.

I am looking for a 34 tooth speedometer gear for my dart. Anybody have one?

The emergency brake lever and the cross shaft that goes between the shoes are not available as normal brake hardware anywhere I have found. I have all new hardware except for the drums already but have misplaced these items.

Could also use a 34 tooth speedo pinion gear.

I am finishing up my 8 3/4 rear end project and have lost some of my brake hardware. I need the emergency brake levers that go on the rear shoes and the bar and spring that goes across between the shoes. I guess this will teach me to move a little faster on my projects. Send me a PM of what...

What style? Magnums or standard log type? I have a set of log type. What to they have to fit?

It will probably be pretty noisey, should install gears in sets. Shouldn't have any trouble getting a good used set. Most guys are not going to want to split a set to sell anyway

I am in Marion, Iowa.

Sorry forgot about bolt pattern need large bolt pattern.