Search results for query: *

yep X2 It will stick even over dirt!!

X2!!!!!here big time X2!!!!!!!!!!

X2 and for gods sake make shore its all the same color!!! or you WILL youes three times the amount........Artie

It will change the color allot,if its the old polly colors asplesly. just spray it and don't pull the metallic as much!! the more you pull it the liter it will get....hope this helps

X2= if you have a week for it to cure and dry cumpletly..I can get that free and very seldum youes it.. its made in Martinsburg WA.....

X2-and you can buy it any color you whant.and if theres a place you cant get the wire brush It will stike...........

x2

A neon wiper assembly would hide pretty easy!!just a suggestion.......Artie

I think I could live with that for a little while

dam that goes to show how many years its been since I bought any.but still more than likely cheaper and get a better paint.............Artie

the paint shop supply I used to deal with will put your color in A spray bom.if you don't have one I can get their address and maybe they can send it to ya........and it will have the clear and all in it buy a case of 6 may be your best bête but i'm sure one can will do.depending on...

I have to agree with that,I will save the flat look for stripes and hood black..and yes I would rather see a little refels if none has blocked it then all flat to hide it.......Artie

think cheap my old primer gun is an old binks 7 now were talking old school:cheers: and id still put it up aginst the new ones (I think)evon for paint with alittle tuning...lol Oboy you guys are keeping me going............Artie

that is an easy fix if its in the middle of a duster or dart fender..if you get behind it and push it out with your hand then take a dolly hammer and tap down on the top edge of the fender. then if it is off get a wide blunt tipped chisel I have a 3inch wide masons chisel that I have ground...

they have a paint book with all the paint codes and chips i'm sure you will see your color and they also had a good choice in custom colors that was from the house of color.............

when I worked there we boult by our mixing colors in 55gl.drums. that was depont.. in 85 i'm sure they still do if I was him I would wait till they put on a special on and sand and outline tape it take any or all embalms off and the body work.and then get a price and he will get a good job...

auto zone & advanced auto in hagerstown............Artie

that would tell me they dont wont to or know whow to find another co. or try it your self..........Artie

all the ones I have seen or put in the locking ring goes all the way around and should meet in the middle on the bottom............Artie

I would use new rubber seals unless you can take the old ones and bend them double without any cracking all the way around them.I use a little WD-40 for a lubricant and a thin sciem of silicon for extra insurance I would not use the urethane god help you if you have to take it back out.I use...

I think this is the best answer yet...you could lern to weld and grt you car dun too:cheers:.........Artie

fiberglass will not bond to metal It will crack within a year.I would use bondo before glass.and any one that says it wont hasn't dun it much.fiberglass sticks to fiberglass or wood.Im not trying to start trouble just trying to help save you time and money............Artie

get a can of WD40 spray around the rubbers base let it soak in and should come of fairly easy I would go around it 2or3 times let it set for 1/2 hour.that has worked for me.........Artie

R/T specialty's if thay dont have them there not made

I have used the glue you put glass in the new cars but be sure you have it were you want it you only have minutes to work with it. and wen it sets you will destroy it taking it off......Artie

how bad is it pictures would be a big help.....Artie

are you using flux core wire ? if so you have to reverse the polarity on your welder.if not dont know with out seeing it....Artie

I don't think the older muscle cars look right with the newer brite colors. but thats me.I'm shour what ever color you chose will look good........Artie

X2 :thumblef:

I don't think the white to and black hood would look good but that's me.I would do one color with the blacked out hood and scoops and maybe the 340 wedge decal.I think that would look more racy..but that's my thuat.......Artie:coffee2: