Search results for query: *

Is that 300 each?:D

The small one is for the vacuum "performance" gauge. The large one looks like a temp or vacuum switch boss for optional A/C or power brakes

My 67bcuda that I just bought has a 273 water pump on it. seems to work ok, idles at 190 in the driveway with no shroud. It also has the 360 dampener on it. timing tab/marks are there but probably a ***** to read with the hose in the way. not sure on the 65 cover. I have never heard of any...

Usually an out of round journal causes premature wear, it wears on the ends and slips blocking oil passage and failure. incorrect clearance at torq is the main problem on a turned down crank. has happened to me in a big block, destroyed a fresh forged crank. good luck with the stroker build!

chain is really loose, inch play on either side, doubt it has been changed, pan has been re-sealed as well, someone trying to stop leaks. spent the day pressure washing the crud off the underside of the cuda today, what a freakin mess that was, degrease the car, degrease the garage,degrease the...

heads don't look special, 4071051, don't know what a W2 casting is.

Just want real info! no BS! lol

Found an E58 that came out of a 79 300 today for 3 n change, couldn't tell til I got it home and tore into it. see pic..double roller! definitely a high mile rebuild project. Cant seem to find good data on this engine, so much conflicting information. Looking forward to seeing what the...

spark, fuel,compression..it has to run, I had a chop job wiring harness once that would disconnect the coil on start but be okay in run. doubt that's your problem. sounds like distributor is 180 out, or your timing marks are off. I rebuilt a chibby once,(and only) and cam geared it wrong...

I like that idea, cheap to fix!!! lmao

but only one valve? wondered if it had water getting in or something.

Pulled my ex manifolds to fix flange leak and noticed a white residue in one port and saw a really tan colored valve. All the others look the same, pretty normal for a mega-mile engine. its a 318

disappointed when I looked at casting number, have a 7630-318-4, think its a truck engine..however it does open up the possibilities for a build as I now am not concerned with a date coded 273 HP, which is what the car came with. wonder what else I will find that's been changed.

casting numbers are probably there, haven't scrapped the gunk off yet, but wonder if there is a vin somewhere

Thanks for info, I still don't know what engine is "really" in the car. I am going to pull it out soon but would like to find out where any stampings are supposed to be located. I cant find a vin stamp behind drivers head on block. I will get my tools out of storage and maybe start today.

Getting ready to pull 273 out for rebuild, just a couple curious questions Does the 180 hp engine have adjustable rockers or only the HP version. fender tag says HP, but not assuming since it is an eldebrock with holley on it. Where is the vin on the block? cant find anything behind left head