Search results for query: *

8.25 usually 10 inch. 9.25 usually 11 inch. Kim

Are u talking about the firewall plate? Kim

That for sure makes life easier. Kim

I’m just busting ur chops. I’ve done that too. Well I guess ya gotta blame somebody. Kim

Oh boy o boy. See post above. Kim

Still the wrong part. Read his post!!! Kim

That’s not what he is asking about. He means the o ring for the bolt that holds the rod to the brake pedal. Kim

That’s great. Kim

Yes those are the travel limit stops. They need them to stay within the design parameters of the cars ability to not turn too sharp, cause the can cause a few adverse effects such as a wheel folding over in a hard fast turn. I hope I explained this right. If not someone smarter than me will. Kim

Sweet. Thanks. Kim

Sometimes a little light bulb turns on. Kim

I would say the calipers are on the wrong sides. Kim

Tires are front 235/60/15. Rear 275/60/15

I had the hydro boost system all picked out but the body guy changed a lot of things on the build. Now I get to make it right. Kim

Thanks. I can’t remember what size the brakes that are either end. The body guy doing the restoring got all hard lines. Booster and master cause he knows. Barely any brakes. Low mushy pedal. I told him to go with the hydroboost but that didn’t happen. Kim

What’s everyone using for a master cylinder when they convert to 4 wheel discs. Do I have to change the splitter valve or whatever it’s called down on the frame. Do I need an adjustable prop valve. This is on a 73 Cuda with power brakes. Altercation with Wilwoods on the front. They put a new...

Very nice. My car is a 4 gear car so the brake pedal is pretty low to the floor as it is. It’s a race car now with an auto. Kim

Sweet, what does the mod look like. Or do u make a fancy pushrod? Thanks. Kim

SuperStock Hemi Barracuda/Dart forum

Idk, I don’t have the original box. I’ll see if I can find anything as I’m pretty sure it has the nuts and bolts with it. Does it look like it will work 4 u? Maybe try in the BO29/LO23 thread. Kim

U r correct Steve. Kim

I haven’t see 1 for a booster relocate. U may be able to have 1 fabbed up. These pics is for the master cyl. Kim

Good 4 u AJ. A little nap never hurt anybody. Kim

Apparently he hasn’t checked the fluid either. It’s not rocket science. Kim

u more than likely need a brake booster also, or maybe the hose is off or plugged. Does it have 4 inch bolt pattern or 4 1/2 in pattern? Post some pics b4 u kill urself and someone else. Kim

Have u checked the brake fluid in the master cylinder yet? Kim

What car? Manual or power brakes. Cast or aluminum master cylinder? Kim

I’ll check the 2 sets I have. I got 2 parts cars last week so I can check them also. Kim

I believe it fits in the groove on the shoulder of the bolt. Kim