Search results for query: *

numerous threads on this subject......dont think you will find sbp steelies to work.....grind caliper....

Here we go... SOOOOOO MANNNYY THreads on this subject !!!!!!!!!!!!!!!!!!!

Measure as stated earlier and make sure drum or rotor is mounted to axle...

215-65-15 for sure ...215-70-15 would be better .. but i do not think that BF TA makes one ???

you can t go by back space .... i wanted a specific look to compare to original centers as you can see..... the newer centers are different ... either way ... i went 4.75..... 4.5 would of been slightly better ....

Cpearce... yours done ?

15 X 7 custom wheels

OK .......to all you doubters out there stating that 255-60-15 will not fit on back of a 69 Dart .....Here is the proof again .... on a second set of custom steelies i had made.... only thing i would different is change the offset 1/4 inch to have more of wheel exposed on outside ....NOW unless...

The back wheels are getting painted as we speak ... once i get them installed i will take a photo ....

Correct... if you had WEAK SAGGY springs there will be an issue .. and why are we sticking with 4.5 backspace ... you can get different back spacing .. like i said with CORRECT back space ... 255-60-15 will fit

I have yet to hear a 15 X 7 inch wheel will not fit in the rear with correct off set... and i know that 255 60 15 tires fit ....

255-60-15 WILL FIT .... you need to measure correctly to get the proper clearance ............Been there and done it with SBP centers welded in 15 inch rings ..... so why would they not fit with BBP 15 X7 wheels ????

Put on the brakes.... last i knew.. you could still get SBP drums from Rock Auto ... and everything else you need in the rear ... In order to match rear sbp .. i do believe Kelsey Hayes modification using parts from another A body... but those parts are getting rare and to expensive to rebuild...

sent you email

What are you looking for ?... is it the 69 dart in your avatar... I have steelies custom made for the rear if you want to stay with sbp... they are sbp 14 inch centers made to 15 inch ... and they have the CORRECT center not the updated version .. let me know if you are interested ..

Back side of wheel ( where it contacts hub face ) to tire bead contact to wheel ( inside ).... that is why you should then give yourself 1.5-2 inches of clearance on top of that towards vehicle side ..??????

i installed mopar wheels custom made by stockton on my front wildwood setup .... register is larger than wildwood center hub... so the studs center the wheel ... are you guys saying this is not a good way to go ?.... are you saying i will have a vibration ?... or are the studs going to fracture...

A further back shot

I will try and get a further back shot .... was not thinking .... but it is sitting on jack stands ...would of been nice if Radial TA did make a 205 70 15 ... but i think the only mak 215 70 15 ... and i think there would be some contact with front fender on that size....thanks for the help

Installed fronts 215-65-15.....Defintately 205-70-15 would of worked but i opted for a little wider stance... I like it .... now moving on to finishing rear LBP brake upgrade and then making hopefully 15X8 stockton wheels ...i called them yesterday and they stated it has been done... just need...

15 X 7.....i will need to check the offset ... i do not remember ... But i think 4.25??

Joe.......i do believe you are correct ... as i was told by Moser....but not by much ....

I know for a fact that 255-60-15 will fit... i had it in there before upgrading to bbp ... I had it in there with custom made stockton wheels ... center was sbp on 15 in ring.... no rubbing at all... now that i upgraded i was just wondering what and if guys could fit an 8 inch in the rear with...

Thanks for info... i will get with Stockton and see if they can adjust offset to accomodate my needs.. if not i will stay with 15X7

OK .... my 215-65-15 should fit on my customer 15X5.5 wheels ... and the rears i will have custom made also by stockton so they will be a gurantee fit and no rubbing ... they can move offset any where .... but not i am glad i can use 15X8 on rears with 255-60-15....Gentleman ... THANK YOU very...

Sorry 215-65-15

Cpearce..... you may have stated it but what wheel size on front again Please .... because that is the front tire i ordered ... 215-60-15

BEAUTIFUL all and thanks for photos .... Steven what wheel size on front and what tire size ?... thanks ... and did you have to modify front to fit ?

Steven ... would it be to much trouble to get a couple of photos of that rear wheel setup ?... Thanks

Steven.......15X8 NO fender lips ?.... NO rubbing ?.... Stock spring location?.... THANKS