Search results for query: *

ok here are the pics of it works like a dream and here are the part numbers 2-2-349 flange 5-785x u joint 5-788x u joint 2-3-8001kx slip yoke 2-40-1531 slip stub 28-30-62-7400 pipe they used got mine done and joint clutch and gear of saginaw mi and i must say the guys do a...

well guys my ball and trunion in my 65 cuda ended up going bad after sitting a very long time and the boot being ripped. I tried many times to find a replacement and finally found one on here. The thing that stopped me from keeping it that way was i dont know how long the b&t joint will be...

yea pretty sure the cover on the back is the roundish cover and has 10 bolts it looked nothing like my 7 1/4 much bigger pig the back plates for the brakes were way different than mine and so were the drums. I don't know if that helps but i was just going by what i found on here. I bought it to...

hey guys looking on good ol ebay i found what was discribed as a 7.25 was actually a 8.25 out of a 75 demon. I was happy to see that it's an 8.25 but i dont know exactly what gear ratio is in it. I took off the cover to look and it's an open diff and had numbers stamped on the ring gear the last...

Mine has great pedal pressure, i got mine from my buddies dad's store(owns a carquest) he is a firm believer of quality parts and not the price. If i wanted a cheap one i would have got one from advanced auto or auto zone. Those places have junk for parts it seems, some of their parts are ok but...

It was a good clutch, i got the premium one because i didn't want junk in my cuda, I'll have to see what i can do to get another one. thanks guys

yep since new i figured it was because the rear springs were bad and flexed alot. Thanks for the info

just thinking about it i probably should have put this in the 4sp section so i apologize, not sure if it's a 4sp issue or drivetrain

hey guys i have exhausted my brain thinking what might be causing this issue. The clutch chatters bad on take off, the flywheel was resurfaced,new clutch,new rear springs, drive shaft seems ok, rear end has a little play,don't know what else it could be? You guys have any ideas? The clutch is a...

nice looking cuda wax, what do you have for engine,trans?(i have the 273 commando and 4sp) All i know is that it depends on how the car is driven if it is going to break or not. I was told by many that the R200 in my datsun was super strong and pretty much indistructable, Well i broke three of...

these are the pins that hold the spider gears in the s/g diff. my car has four spider gears that link the two axles to each other and to the power. By welding the two together it puts the strain on all four rather than two if they are worn a bit more and makes the centers alot stronger because...

i dug into her last night and this is what i found: I figured it was already broken so i took both of them and put them together like they would be in the diff and welded both together. Should hold alot better than on their own and everything went together fine. Only time will tell if...

Also what is it that can't handle the power? what is the weak spot in the 7 1/4 rears?

I have a 4sp in my cuda and it has held ok but it does have alot of miles on it. I wouldnt even worry about it if i didn't get noise from the rear. Is there something that i should look for in the carrier that would make it vibrate like it is?

Maybe i can get one from bill, i have yet to hear from him. I didn't know it but he only lives 20 mins from me :) He told me he has a ton of parts hopefully he has what i need.

This has probably been answered someplace on here but i couldn't find it searching or just looking at certain topics. What is the limit of the 7 1/4 s/g? Mine is the stock one in my 65 273 and it needs some attention. I get a vibration at high speeds and under normal cruising, if i give it gas...