Search results for query: *

Sold!

Sold

this bell housing from a 340 is for a 10.5" clutch and has a 4.354" diameter bearing retainer opening. It has had all of the threads inspected and chased out with a tap. Just clean it up, paint and ready to use. Price $150 OBO plus the ride, can also be picked up locally in La Plata, MD or...

the bearing diameter is correct, but an A833 OD mounting bolt pattern is not present on it. it only has mounting bolt patterns for a NP 435 trans (HD granny gear 4 speed) and a truck three speed (?). good for a truck, not a car. price drop $45 OBO

I am not sure about if they re hardened it after grinding, but since it was done by a reputable shop I would hope they know what they are doing.

rod journals are 2.100 and have been widened, if they had not widened them I mike of tried to have it reground to 2.095" and use .030 under size rod bearings with my MOPAR roads?

sale pending

I have this forged steel 3.31" stroke small block mopar crankshaft, from a 273, that came with a 73 340 engine I bought in parts. The previous owner had had this crank reground, the mains were ground .010 undersize and the rod journals were ground to small block Chevy large journal size. Guy...

these connecting rods came with 67 273 4bbl engine I bought in pieces, the guy I bought them from worked at a machine shop years ago and had replaced the rods bolts , resized the big ends and rebushed the small ends of these rods. they have casting number 2406782. they look pretty good...

here is the pictures with the straight edge, they valve tops line pretty well. A few valves are down by a little (less than .005") , probably due to some valve stem wear. Each head has one exhaust bolt broke off that will need to be repaired. Heads have some surface rust from sitting for...

it is dark outside , so I will get you the picture with the straight edge tomorrow after I get home from work and get you a shipping quote. thanks, Bob

this pair of Hooker Model 21505 Aero Chamber Mufflers are used but are in very good condition, only used for a season or two on a drag race car they have 3" inlets and outlets and are welded construction, sound great located in La Plata, MD Price $50 OBO plus the ride or local pickup in La...

this set of "308" casting number swirl port heads came off of a running 360 engine that was used for a stroker build, engine had 89K miles and ran well. Heads can be cleaned up to use on a driver or rebuild for a performance engine. come with the shafts and rockers, price $100 OBO plus the...

this bell housing from a truck fits a small block engine with an 11" clutch and an NP435 transmission, Casting number 3893723, has all good threads and no cracks, Located in La Plata, MD , price $50 plus the ride or can be picked up locally at my house or even at the MOPAR eastern classic...

is it still available? What woukld shiping to me in 20646, La Plata, MD cost?