Search results for query: *

Selling the Slant 6 out of my Demon clone. It's original to the car as far as I know making it a 1973 engine and likewise on the transmission. The engine runs well and the transmission shifts very good too. On the Slant 6: It has an offenhauser 4bbl intake manifold, newer Carter high volume...

Bump

Price drop! $600 plus the ride!

I have a brand new in box SSBC Mustang II Disc Brake kit for sale; part number W148-36R The kit was only opened to get some rotor measurements and look at the calipers, I purchased these to put on a Dodge Dakota but I've found another alternative (and on top of that these would require a...

I have a set of PRW rocker arms, 1.6 ratio for small blocks, all in all in good usable shape but one has a noticeable amount of spring interference grooving on it, a couple others have some light rubbing to them. Asking $150 plus shiping (fabo special price :D) or trade for a set of 1.5 ratio...

Hey guys, not sure how many AMC guys or friends of AMC guys we have lurking around here but I have a 904 for sale that was hooked up to a 304 V8 last. My dad wanted to save it for parts but I've concluded that it'll never happen, of course this is after I've tripped over it numerous times...

Hey guys, this has been collecting dust for many years and I don't see it being used any time in the near future. Has never been used on an engine! It looks to be one of these: http://www.summitracing.com/parts/mil-30760/overview/make/dodge Asking $75 + shipping

Okay, not an A body part but this came out of a 1989 Dakota that I parted out recently. This NP231D works well, the truck that it came out of had a seized shifter (stuck in 4WD) but it worked, after I pulled the shifter off of it the case itself shifted nicely. It has 199k on it but the fluid...

Hey guys and gals, I was down at ye ole storage unit today and found these covers. I restored these for a Plymouth wagon that I had a while back but took them off and now I have no need for them. They've been shot in Duplicolor engine enamel, black of course, though I guess when i put them on...

I do have an A body one but the car would be fun to get lifted and dangerous to get under, but I have another Dakota that has a 7-1/4 that is probably the same setup just wider and let you guys know!

the front diff on the early daks is a 7-1/4 and as far as i know it will fit solid axles from an a body rear axle, but this is in an early (1989) dakota so I'm not sure if the 91-later dakotas have the same front axle or not.

Working on yanking these from a 4x4 Dakota today from the front diff, the ration is 3.90:1, not sure if anybody would want 3.90's for their 7-1/4 but I figured I'd post them here before they go to the scrap yard. It's yours with or without the carrier (your choice!) for $40 plus shipping from...

Hey guys, unfortunately i know very little about this engine or it's history, at some point it was lowered into the engine bay of a 87 Dakota and as far as i can tell, never ran in said truck. The engine I know has been sitting for a while since the truck was bought by my dad, transferred to my...

Hey guys, got this setup and thought about putting this on my Dakota's 360 but i think i'll hold out for rollers. ANYWAYS, I did clean these up a little but haven't played with the adjusters at all, i know being "loose" is a concern for these rockers but my set doesn't move for me in that sense...

yes! I did, thanks for reminding me to mark this sold lol EDIT: I would if i could (mark it), anyways this stuff is sold regardless.

pics added guys

Hey there guys and gals, up for sale is the rotating assembly from my 440, which is fresh from the machine shop. I sold the car that the engine was going to go in to so now I really don't need these parts. Anyways, here's what I have: 1971 crankshaft, was turned .010" 1971 Rods, were cleaned...

Hey Troy, what shape are these in?

I was implying that I was interested in the adjustable rockers lol

I have a Milodon Center Sump like I told you in chat one night lol, also probably have an electronic distributor laying around too, I'll let ya know if it comes up!

I'll take it! Rani, I can ship you the carb (if it still has it)

these look familiar lol

is the 780 a 3310 model? and is the choke removed?

if you still have it I want it! (sending pm)

Manifolds are still hanging around in my rafters!

Valve Covers are gone!!!!!!!!!!!!!!!

pm returned

Up for sale are some small block parts: 1) Set of magnum manifolds - these are off of a mid/late 90's Dodge truck, they've been taken off, blasted, and painted, now their just waiting for a new home since I upgraded to headers on my Dak. THESE EXIT OUT OF THE BACK OF THE MANIFOLD. They go...

it's a 3.9 guys, that's the one that has the same bellhousing bolt patern as the SB because it was literally a 318/360 with two cylinders lopped off

I might have one somewhere... the 340 that this came off of has been apart for a decade, give or take a few years