Search results for query: *

Did you see one of the last posts on the 451 manifesto thread Andyf posts a pdf of the different off the self pistons. Thought id pass that on Good luck im in the process of building some headers and loving it Aaron

In working on the same build now bigdummy i havent ordered pistons yet but i have most all other parts to start the build but i just did a partial block fill on my block and plan on letting set for atleast 3 weeks Good luck Aaron

I found these and thought i should post them

I might have to use a gasket but was hoping someone may have a cad drawing ive found a shop that will make some 1/2 thick flanges of mild steel for 90 bucks a pair which is by far the best price ive seen for a set on the net.

Im in the process of starting the mock up of my boosted low deck big block swap in my valiant and im trying to source out a set a 1/2 thick header flanges for a set of 440-1 heads does anyone have a cad drawing of the header flanges or a basic drawing of set of flanges for these heads i could...

This is the race wieght of my 62 valiant with me in it im 175 pounds the car had a turbo slant six with 8.75,caltracs,frame tied,tubular front core support,disk brakes,and 8 gals of e85, no interior and a 6 point roll bar. Aaron

Ok basically I scored a set of Indy 440-1 heads and decided to build w new power plant of my valiant. Im building a 500 cid low deck storker motor topped with the indy heads and indy 400 4150 intake. My plans are to convert the intake over to efi im in the process of sourcing the parts now and...

I'm in the process of compiling parts for a 451 low deck Storker motor with indy 440-1 heads, and im planning on a compound turbo setup, should be a beast

Yah Dennis I couldn't resist I drove the valiant into work today all though I'm working 7 am to 7 pm.. i'm working the winter bugs out but. I pulled a couple hole shots and ran the valiant thru some full boosted pulls at 15 psi last night the car is responding beautiful. This year if I can keep...

Well ladies and gentlemen I won't beable to make it to the track this week the car and trailer are all ready to go but it looks as if I'm going to have to work a 12 hour day on Saturday so I won't get out if work till 7 pm. I'll diffently keep fabo posted on just when the toad will be making...

It's about 20 mins north of jackson and about 40 mins or so from CL Dennis will do ill let you no I have a couple some things to do in the next couple days but I should have to hard of a time getting them done.... I'll keep you guys posted and as of right now that's my plans Aaron

Well the 2014 race season is fastly approaching and here in Michigan some of the tracks were trying to open this weekend but the weather looks like it's going to push the opening at onedaga. back another weekend. I no its only a 1/8 mile track but it's great for testing and tuning I was out...

I switched last year I had Eric at horsepower innovation set mine up only because he has his own design of metering blocks and he installed some larger ventures and flow tested it...

Eric@ Horsepowerinnovations http://www.horsepowerinnovations.com/concrete/ X2 did my blow thru E85 carb and it was almost set out of the box.....

Kid I used a jegs kit 67 and up in the toad and I think it fit prefect.

I'm getting ready to installing a 8 gal fuel cell on my 62 Valiant I'm planning on installing it in the trunk of the car positioned inside the spare tire well. I'm going to try and make a mount from inside to inside of the frame rails with some structural supports between the two. I'm hoping...

I have a couple questions I'm in the middle of some chassis work/roll bar and I have some of the generic plastic race seat with no mounting hardware? My problem is I have to install atleast the drivers seat so I can take the measurements that i need to start the construction of my roll bar what...

bill if you didn't no I work in a steel mill and if you don't get your answer maybe I can bring a rocker arm into work and have one of the lab people do a test on it is there any one spot u had in mind I'm off after tonight and don't go back till Mon nite pm me if I can help u I will aaron