Search results for query: *

I,m planning ahead for a winter project for my race car.I,m pulling my transmission and going to have a trans-brake installed.Any advise on brands/make/prices for a 904 trans would help.Car is my 66 Dart with 410c.i smallblock,904 with lower 1st gear,red belts,blue clutches,manual valvebody with...

I,d like to maintain my power drum brakes(5x4 sbp)on my 68 Barracuda.I have some(5x4.5)Cop rims I,d like to put on the car.Who has drilled the front drums,rear axels and drums?Was it an easy job doing the fronts?Removing the axels to be drilled isn,t hard for me,but have never seen the front...

I,m having a Dana 60 built with the 1350 Billet yoke.Does anybody make a 26 spline 904 trans yoke that accepts a 1350 u-joint??I,ve looked and can,t find anything with Strange,Moser,Summit.I,ll be getting my driveshaft with 7260/7290 front and back u-joints swapped to the 1350.Any help will be...

I,m having a Dana built for my 66 Dart race car.Right now I,m running the 7260/7290 u-joints and want to up to the 1350 u-joints.I have the 1350 yoke on the Dana.Do they make a conversion u-joint to fit my driveshaft front tranny yoke(904) or will I need new ends when I have the driveshaft...

I,m wondering if the pinion length is the same for 8 3/4 vs Dana?Will changes need to be made on the length of my driveshaft...longer,shorter.Thanks for any input.:-D

I have a manual valve body in my 904 now,is the reverse manual valve body were you shift down instead of up?Can these be use with a B&M Star shifter?Also is it true that transbrakes are hard on the tranny?Thanks for any help,as I,m trying to learn more about tranny setups.

Does anybody run temp/pressure gauges in their tranny?I,d like to run some gauges for my 904 tranny in my 66 Dart that I race,I,m just not sure where to tap/plumb into the trans.Any pics of location or advise would help.Maybe just tap into the pan itself?

As some of you know,I tore my spring perches off at the start of July at Grand Bend Motor Complex while launching off the line.Well I,ve made about 10 passes since welding new perches on and last friday at Pinks here in Toronto(Cayuga)I blew a tranny seal.While pulling the tranny yesterday I...

I had my transmission out last month and replaced the pump and also added 9 blue racing clutches.Now I,ve had this 904 worked on with lower first gear,changed out the drum,red racing racing belts,new pump and the 9 blue clutches.I,ve been racing with this tranny(904)and made about 30 passes...

I have an empty .489 chunk with caps and a spare(big yoke)What all is needed to put this together?Does all parts needed come with the spool?Any help will be appreaciated.Thanks:read2: P.S I want to put 4.56,s in the .489 chunk

I have a 77/904 built for racing in my 66 Dart,it has a new 3 prong neutral safety switch.Can I just put a tube connector on the center prong and run it to the starter relay ground?It,s just to pass tech so the car won,t start in gear.Will this work?If not what can I do,I have no need for...

I have a 904 transmission behind a 410 sb.I had the tranny redone for racing with new belts,lower first gear,change drum and a TransGo-3 manual valvebody kit.My t.c is a Coan 8 inch 4500 stall.I,ve had the car out for a test drive around the block(2 miles)and everything was good,so I trailered...

Anybody know where I can get a SFI approved 6 bolt internally balanced flexplate for a Coan 8 inch torque convertor?Any help will be appreaciated.Thanks.:cheers: P.S Checked Summit,they don,t have one. Just took a pic of it and made sure it fit the crank end.:-D

I need to know the pinion offset for the A-body 8 3/4 rearend?Can anybody help with this.Thanks P.S I,m having a c-body rear shortened.

My tranny is in the shop getting prepped for the race season,out with the transgo-2 and in with the trango-3 manual valve body.Is anybody useing one of these?How do you like it?At first he was talking the Cheetah one?,but I guess he decided on the Transgo-3.Any feedback will be appreaciated.Thanks.

I have this 904 that I took to the tranny shop to be looked over.My buddy says..looks like a re-build alls good,I say O.K put a stage 2 shift kit and order a 2500 stall.I get the tranny back,and am trying to set the kickdown,no luck with it shifting to 3rd.So I take the car there,and apparently...

Here I have the broken tranny mount(dinnered my rad,1st ride)out of my 66,slant 6,early 904.As you can see it,s broken,I can,t believe this little bolt holds the tranny?Anyway I,ve put a 360,904(2500 stall)8 3/4 3.91s.g with Moser axels in the rear.My question is should I weld,beefup this...

Hi, I want to order the 904 Hughes 3000 stall convertor,I noticed the ring gear is not on?What flex plate is needed and what size convertor?8,9or 10 inch?This will be going on a 360 with a mild cam,750d.p holley,8 3/4 with 3.91 gears.Thanks for any advise!

I,m new with the early a 6 cyl. tranny,so what fits?Are all 6 cyl. 904,s the same?Can I just swap with no issues??Thanks for any help!

Is there any length difference? 1966 6 cyl. 904 compared to a 1973 318 904?? And also why can,t I use a 6cyl. 904 on a V8? Thanks for any advise!

Here,s the 8 1/4 s.g with new 4.10,s

I measured the drive shaft for my 66 Dart 6 cyl. 904 tranny. which I just put a 8 3/4 .489 big yoke.(6 cyl. 904 shaft to long)So I tried the 73 swinger 318,904 with 7 1/4 rear(driveshaft),and it,s the perfect length.Now what I need is the part # for a crossover u-joint so I can change from the...

Are the driveshaft yokes for 904 6 cyl. the same for V8 904 ?? Thanks.

Has anybody purchased axels through Magicsunset08??Just wodering how your experience was(quality,product and time frame on delivery)Thanks.

I have a 8 1/4 sure-grip with 4.10 gears.It has 1 broken axel(removed)no b.plates or brakes.also 3.21 gears.If any bodys interested $300 takes it all.Unless shipping is involved.Or trade for rallys.What ya got??

Will a 2000 Durango rear fit early A-body??Any suggestions would be appreaciated.Thanks

Hi! I,m trying to remove 7 1/4 bbp axels from a 73 318,swinger.I punched the little pin in,now the bigger pin has a slot for flat head screwdriver.Does this have threads or can it be punched out?Also will these axels fit a 1966 7 1/4 rear?I want to switch because the 73,s are bbp.(to fit 14 inch...

how strong are the early a-bodt auto, transmisSIONS?AND CAN YOU BOLT NEWER LA BLOCKS TO THEM??THANKS FOR ANy ADVISE AS I,M NEW TO THE EARLY "A"s.THANKS

Hi Crackedback I think your a rearend man??HAHAJust picked this up for $200,It,s a.489 with 4.10.Question?What,s it out of??What,s with all the other #,s.Any help would be appreaciated.Thanks

Well went to test and tune last night.It was a little chilly 7 degrees,made 8 passes and ran low 13 all nite THEN it felt like one tire kept brakin loose.I got back to the pit,s and noticed a little (grind,crunching)noise.I was done for the nite anyways,so on the trailer...This morn,backed it...