Search results for query: *

In the planning operation to stuff my indy 360-1 headed 340 stroker motor into a 96 dakota. I picked up some hedman 5803 long tube headers. Now i am wondering about adapters to go from the w2 down to the LA exhaust bolt pattern. I found the one in the pics that would work but who made those? I...

Ok i have a 340 stroker (418) which had a cam issue. I am running ported indy 360-1 heads with the indy single plane intake. 10.5 compression 1.6 t&d roller rockers 4 inch molnar crank .04 over bore. It currently has a lunati solid roller 40200733 I run 4.30 rear gears Passon 4 speed hemi...

Looking for someone that deals with T&D. I need a replacement intake rocker for my 360-1 heads. 1.6 ratio Left hand offset (standing at valve I have to step left for pushrod) I believe part number is 12-1156. TIA

So I have a 340 with a 4 inch stroke 4.08 bore with icon ic745 dished pistons. 20.5cc I have indy 360-1 heads ported already. 1.6 ratio rockers Chambers measure 62 cc Pistons measure .058 down in the hole. (Machine shop messed up) I have a .027 head gasket with 4.125 bore. I got a camshaft...

I have my 340 block at the machine shop. They machined the deck and noticed some plugs in the deck which he assumed were coolant passages. Is this normal? Or did someone do something strange? I have not been at machine shop to look or take a pic. Maybe next week I can swing out that way for pics

I have icon ic745 pistons in my stroker and I am trying to find out how big of a valve I have clearance for. Hoping there is enough for 2.08 valves

So my 340 stroker has been burning a lot of oil so I have tore into the engine to change the piston rings. Heads have about 1000 miles on them. They had new seals and the valves seemed to be good when I put them together. Heads are w2 Now I took the heads off and I found one piston to be...

I have w2 race heads which have the 2 inch installed height with 3/8 valves At the moment I have a brand new hydraulic roller cam installed from lunatis recommendation. I will be installing mrl solid lifters in the near future (already spoke to him about it) I have the mopar valves...

now that i have debated for awhile. I was planning to run the direct connection 6 pack setup on my 418 stroker build, but have decided to set them on the shelf for future useage. now i have a 418 with w2 heads (mild port work) 2.02 intake and 1.6 exhaust. 9.5 compression I have a mopar m1...

I finally got the small 340 installed into the dart I fired her up and heard a tock so i tinkered a bit trying to figure it out. I have hughes hydraulic roller lifters. I plan to go talk to the guy that built the 340 on monday and show him this video, but in the mean time i thought i...

So i ordered a set of headers from tti exhaust TTi 340AW2 for my 418 stroker w2 headed engine build Now i was wondering about an oil pan and if anyone has tried fitting Milodon 31590 oil pan between these headers I do not believe tti has tried fitting this oil pan with these headers. So i...

I bought some main studs from arp part number 240-5501 that is suppose to work with the windage tray. Does anybody have a photo of these main studs installed? It seems like i have the wrong style. I have 5 long ones that the windage tray would bolt to. At the oil pump the threads sit very...

ok i have a 340 stock stroke and .03 overbore picked up some batton performance max ported prepped w2 heads with harland sharp 1.5 rockers 10.5 compression heads setup with 650 rated sprigs and 2.04 intake and 1.6 exh valves Will be mainly street driven (i know most people will say it has too...

i had a friend build up a 340 engine. He sold the engine to me before he moved and now i cant find him. I forget what cam we decided to use onthe engine is there a way to find out what cam was used without taking the engine all apart?i believe it was an aftermarket cam, but i cant be certain?