Search results for query: *

Not an A-body, it is my 02 Silverado. Truck cranks but will not start. Truck has a 4 pin relay that powers up several fuses which in turn run to the PCM and FCIM. Relay has me baffled. One pin is being fed from the ign c fuse, which is constant hot. Another pin runs to several fuses which in...

The ignition switch was moved from the dash to the column in 1970, correct?

Old age brain cramp set in...what's the difference? Thanks for the education

.....anybody have one that they can take a picture of and post it? Drawing a blank trying to remember what it looks like. The box with the electrics, what's left of them, is on the top shelf in the garage...car is blocking the shelf.

Be building a ECM harness. Any suggestions on which wire to use? Read someplace that TXL is what the factories used but it was on an Internet forum....so....

What are folks using? Likes/dislikes of any particular one? Which type of wire should be used for additional wiring? Car will have EFI and a electronically controlled trans so I will have quite a bit of additional wiring...

This is not for an A-body...this question is about my Duramax. Truck has a Viper alarm that was installed in 07 or so. It is a Viper 350HV. I want to install a turbo timer. Anyway to make the two work together? I will post schematics if anybody is able to help me out...just need to find them and...

Had their site bookmarked but that 'puter took a dump. This company made LED taillights for a few different A-bodies...if I remember correct they made them for 69 Darts....can someone help me out please????? Thanks in advance... Doug

Who makes a good one? What one to avoid? Would prefer one with the ends still loose. Going to start screwing around with our Dart, funds permitting. Looking for a basic harness, one that I will be able to tie the harness from a modern, from this century, motor/trans ECU to... I have seen a few...

Need some advice Sir. Starting to look for parts for my bike build. Need good lighting....no hokey pokey nonsense...no HID junk. In the past we spoke about products from www.jwspeaker.com/products/ But it was a few years back. What would you suggest, in both 5.75" & 7". I currently have a 5.75"...

Why are these pile-o-crap batteries even produced anymore? Sure they are less $$ than an AGM battery. Bought a lead acid battery for my yard truck. 2 years later it went south. Not denying that an Optima is more $$ but have yet to have one last less than 8 years. Last one I replaced was almost...

Going to be building/rebuilding my chopper in the near future. There is at least a dozen grounds. Would like to combine all of them into perhaps one or two grounds. Everything, including the headlight, as far as lights go, will be LED's so amp load is not going to be all that high. Have tried...

Anyone ever seen a Weather pack one with more than 22 pins? http://theelectricaldepot.com/index.php?main_page=product_info&cPath=7_52&products_id=1403 Been looking around and can not seem to locate one with than that. If/when I get around to finishing our Dart I am going to need to pass...

Wiring the bike...will have a 70/65 watt bulb in the lamp....on a relay. If I remember correctly to figure out amp draw it is watts/volts...figuring just 12 volts into I cam up with 5.83 amps. How much of a buffer should one add? Waiting on an 8 amp auto reset breaker to get here...or should i...

is there a difference in them? guessing that the weather pack parts would be more suitable to a more harsh environment? rewiring the bike and wondering which one would be more suitable. where the connectors will be used is going to be tucked away from the elements...for the most part...

Will be taking the snippers to my bike here soon...harness looks like a birds nest. Will have an H-4 style head lamp with a 60/55w bulb. In order to run the harness thru the frame all the wires need to be kept as small as possible...and even then they still might not all make it. Anyhow...

Looking for a boot to cover a feed wire to a fuse box....only one I have found is this one.... http://www.summitracing.com/parts/RNB-85684/ anybody know of a different one as I do not know if this is going to fit into the recess it needs to....

Just wondering if it can be done....more importantly can they be calibrated in some way to work correctly together. Might be using a 69 Mustang tank in our 69 Dart...and need to use the factory fuel gauge. Long story about the use of the Mustang tank....

A while back someone mentioned a company that sells LED tail lights for a select few a-bodies....I never did book mark this companies site so it someone could post it again I would appreciate it...

http://www.forabodiesonly.com/mopar/showthread.php?t=245183 , thanks cannucky, of something I have been meaning to ask. Does anybody offer a dash mounted amp meter? I know there is the goofy oem one, how ever I will be getting rid of the oem instruments. I had one years go in a truck but it is...

Might not be the proper term. I may be building a harness for my bike soon. It will have a Bosch style relay for the starter, a 30 amp (?) main breaker feeding three 15 amp circuits, one for the ignition, another for the head/tail light and a third for the signals. Years ago I used a contraption...

Anybody know of a place, besides Year One, where I can get one? Body guy is in the process of putting the column back together after he painted it and would like to replace it......

I did not want to hi-jack this http://www.forabodiesonly.com/mopar/showthread.php?t=139089 so I figured I would start my own thread. My car, when the day gets here that I put it together will have a substantial amount of electronics in it. Between the efi, trans controller, rpm window switches...

but it might be worth asking. i have the remnants of an unknown steering column, somebody gave it to me years ago. was told it is for an a-body. my car is not here for me to compare it to, and my wifes car is buried. anyway, the turn signal switch has a tag on it still. doubt if it is a part...

anybody using one??

what year did it move from the dash to the column?:dontknow::dontknow:

what is its purpose in life? guessing that is there as sort of a step down device????

anybody got a diagram on how to wire it so it will work?

are they still available? contacted a few retailers and all they do is try to steer me into something different, when asked if Jacobs is still available, don't get a straight answer.

I have access to them if anybody needs one for domestics from 1960-1982