Search results for query: *

Could someone post a pic of the cloth wire loom in the trunk (1971 Duster) that is on the driver's side from the back seat divider area to the tail light. I am trying to gauge the length of that cloth covering and location on the wiring. Thank you !

I am about to put in an aftermarket double din in my 2006 Charger Daytona. I am confused in that the harness I bought to plug into the factory harness has two yellow (constant 12V) and two grounds. It looks like one yellow and black wire extra but they must go somewhere? Any help would be...

I am looking for a diagram or schematic of the bulkhead (engine compartment on firewall) for a 1971 Plymouth Duster. Thank you.

It's probably been asked before but I couldn't find it. How do you test the oil pressure sending unit on the car? It's for 1971 Ralley Dash with factory oil pressure gauge.

I have the A01 light package and the fender mount signals work, exterior all work but the right side (passenger) side indicator doesn't flash on the dash either in turn signal or 4 way flasher mode. I have a new bulb, and the part the bulb goes in is new. I have twisted it in case the circuit...

1971 Duster with the A01 light package states it includes, fender turn signals, trunk light, glove box and ash tray lamp, map light and ignition timer lamp. My question is I have seen people mention a headlight timer that keeps the headlights on for a few seconds after the ignition is turned...

My right turn signal indicator will not work. All my signal lights including fender tops and four ways work and that right signal indicator in the dash won't light. I have replaced the circuit board and bulb and the part the bulb sits in. It didn't work before on the old circuit board either...

As the title states, Does anyone restore horns? and has anyone bought the "Spartan" Reproduction horns? Thank You!:thankyou:

I have everything on my AO1 light package working except the ash tray light.(71 Duster) I replaced the bulb and still no go. Since it has never worked, I am confused. Does the ignition need to be on for the ashtray lamp to work? Is there a switch that operates the lamp when you open and close...

All my lights work, turn signals including the fender mounted (A01 light package) except the pass side dash indicator. How can the fender mounted blinker work but not the dash? I have replaced the bulb, checked ok, and the circuit board and it still doesn't work.

On my Duster I have the AO1 light package (fender mounted turn signals) Ralle Dash- Since I have owned the car, the driver's side "Dash" indicater flashes, but the driver's side fender indicator does not flash. The passenger side fender indicator works but the Dash indicator does Not flash. So...

Just as the subject states, I'm looking for a picture or diagram of a 1970-1972 Duster Fuse Box, or the list of what the fuses go to...Thank you!

just finished restoring my Duster's engine compartment and now the tail lamps stay on with the headlight switch off. If i put the headlamp switch on the headlights and blinkers (don't flash) just stay lit up. On the radiator area on the drivers side there's two wires from the headlamp wiring...

Does anyone know who sells a replacement ballast resistor for a 2 speed wiper motor (1971 Duster)..thanks!