Search results for query: *

What's a good style connector to use if I replaced the entire ignition switch plug? Not very familiar with the current styles, but l know the Weatherpack stuff isn't design to carry enough load. Like to find something that has plenty of capacity and easily found and purchased. I've got a...

Anyone ever had an amp gauge stick in one spot? Took my Duster to a car club meeting last week and when I left my house the amp gauge came down to about half way between full output and normal and then it just stayed there. I lost 18 months with this car several years ago chasing an...

Finally got my car back together after wiring in a Grand Cherokee chime and the dumb switch that creates a ground path when the key is in the tumbler decided to die. This is the little micro switch under the tumbler in the steering column. Looked around and so far can’t find a source for a new...

Been in the works for like 8 years now, finally getting my battery into the trunk with a remote cutoff switch. Not doing this for NHRA or anything. I just want to be able to walk away with the alarm system armed and no power forward of the trunk. Where I am struggling is with the rather large...

If there is one thing that bugs me about the key-in buzzer in an A-Body is the fact that it buzzes even when the car is running and the door is open. But what I want even more is for a warning if I turn the car off with the headlights on. About 4.5 years ago someone asked the question about if...

Need a custom ring made to move the Magnum crank pickup to the front of my motor. It's not hard to draw one up and get it cut in a water jet, but I thought there was a place that would make a custom ring and save me some trouble. Can't seem to find them now. Anyone got a suggestion on where to...

Working on relocating my battery to the trunk. Wiring and such aren't an issue, nor gauge. What I am struggling with is how to get the heavy battery cable thought the firewall. I see lots of people use the clutch rod hole, but with a 4 speed, that isn't an option. Need some ideas on how and...

Anyone ever swapped an F-Body ignition switch into an A-Body? Best I can tell they bolt in, but the plug is different. Pretty sure they can be wired the same, but not absolutely certain of that. Anyone know if you can by the blade connectors that the F-Body wiring harness uses (rather than...

Why would pulling the VR connection drop my voltage loss in the charging (blue wire) circuit from 1.5v to .5v? So here's some background: Thought I was down to tabs and insurance before I could drive the dumb thing and all of the sudden I'm having alternator issues. End of the night one...