Search results for query: *

  1. DionR

    RPM Air Gap with AFB and stock air cleaner to hood clearance measurements

    In another thread I mentioned that I have an Edelbrock RPM Air Gap intake with a 1/2" carb spacer, AFB carb and a '72 trap door air cleaner and didn't have clearance issues with my hood. This prompted a request to take some measurements to see how much clearance there was. Instead of...
  3. DionR

    Plugging EFI Injector Ports

    I'm nearing the end of my cam swap and getting to the point of dropping the intake back on. The thing that is killing me is that I have a Hughes FI AirGap under my bed and I would really rather bolt that on now. But I don't plan to do the EFI swap until next fall, really don't want to chance...
  4. DionR

    EFI guys, any options for theft protection?

    Due to recent developments on the site here with homebrewed traction control (@racerjoe @Map63Vette), I have been overviewing different aftermarket EFI systems just out of curiosity. One thing I ran across was the option in one of the Holley systems to password protect your tune. This got me...
  5. DionR

    Time to give up on the Thermoquad?

    Been fighting to keep the original Thermoquad on my Duster for some time now, but just about to give up. Ran fine when I first got it running again, only a slight surge/miss at light throttle cruise which I figured was too much initial timing. Well, the surge/miss is getting much worse and so...
  6. DionR

    Thermoquad integral choke adaptation

    I swapped some Magnum R/T heads (the real MP ones) onto my Duster motor with an M1 dual plane and a Thermoquad that matches the car ('74 Duster 360 4 speed). The M1 doesn't have a choke well and so the car has been a bear to start each time I've done so (hasn't been on the road long). Usually...
  8. DionR

    OEM style fuel pump w/ (2) threaded fittings?

    Planning to replace the fuel pump on the 360 in my Duster and I am wondering if anyone knows of an OEM style pump that has a threaded fitting for both the inlet and outlet. The stock pump has a threaded fitting on the outlet, but the inlet nipple is part of the pump. I know I can buy an...
  9. DionR

    Base tune? 71 Dart/318/Carter Carb

    Just looking for a place to start. '71 Dart with a 318, M1 dual plane and a Carter Competition Plus carb (600?), factory exhaust manifolds and dual exhaust, auto. I don't think it has a cam, or any other motor work. Hoping that someone has a similar setup. Looking for jet size and rod...
Back
Top