Search results for query: *

I was wondering if anyone has a clue as to why my 1970 Duster leaks water onto the floor boards? I am positive it is not the windshield we checked that and resealed multiple times! But I noticed when I wash the car and water goes down the cowl it just pours into the car from both sides!

can anyone tell me why my Duster leaks lots of water onto the floor boards thru the vents when I wash my car?

my question's is, did any 1970 Duster's come with the 6 pac hood and if so did they have hinge's or not? also if they did not where did my hood come from, after-market or off a different model? what?

I just ordered a set of sport mirrors for my 1970 Duster from Classic Ind. and should have them in a few days! But I noticed that my drivers side door panel does not have the hole in it for the remote cable! So, does any one have a picture of the hole location in the door panel and some...

here are a couple of pics! can anyone tell me if this the correct way to install trunk seal? if not, do you have a picture of correct way?

well I need help with door glass up and down adjustment! I can not get my door glass to go up high enough, it is about 1 1/4" to 1 1/2" down from seal. is there an adjustment for this and how is it done? I could not find anything in my service manual that explained this!

well it appears that I put the hardware on my glass wrong because the door glass fell to the bottom of the door, I am lucky it did not break, does anyone have a picture of how the four plastic pieces with threads snap onto door glass? I am assuming that since mine fell off, that the threaded...

does any one have pics of where the splash shield go exactly. I did not take mine off, so I am not sure just where they go except by the head lights. I have put my front end back together and for got to install them, do I need to take the front end back apart? I sure hope not!

does anyone know what type of bolt (correct) was used originally to mount the starter relay to inner fender? I have couple of 1/4-20 bolt in there right now but they will not tighten up!!

I put a new tank and sending unit in my car and the wire has been cut that goes to sending unit. my question, is does the wire have a molded end on it and push on or is it just held on with a electric fitting with hole in it and a nut threaded on the stud? if it is a molded wire, does any one...

First off let me say I did not take this car apart and it is my first ever Mopar Project! my questions are, is there a piece of rubber weather strip that goes on the front of the quarter glass in the channel, that I have shown in the picture I sent, and if so what is it called? also do you...

can anyone tell me where the ground wire on the parking lamp's of my 1970 Duster attaches too vehicle, I did not take this car apart and it is my first Mopar ever! a picture would be great!

first question is: does any one have a picture of where the parking lamp ground attaches too behind the grill? 2nd question is: I was taking my 8 3/4 drum's, axle's and backing plate's off to get it ready to assemble a disc brake kit. and this part falls to the floor and I have found out that it...

first off I did not take this car apart and it is my first Mopar! Can anyone tell me how to install the headlight adjuster's on my 1970 Duster! do they snap in from the front or do they snap in from the back side? I looked in my service manual and could not find it in there!