Search results for query: *

I switched from a automatic 904 in my 68 dart, to a abody a833 4 speed. I got it all back together, except I have'nt hooked up the wire to the reverse lights yet. My problem is it won't start now, do I need to hook up the single wire neutral safty wire that was on the 904. I did'nt think a 4...

I had a automatic 904, and switched to a 4 speed. My question is, the reverse switch on the 4 speed has a 2 prong on it, and the automatic I had had a one wire hook up. What do I need to do? Do I need to just ground one side of the 2 prong plug?

My first 4 speed install, have it all in but when I push in the clutch pedal the diaphram on the pressure plate does'nt come back out? I installed the clutch with the tag that says flywheel side towards the flywheel. When the bolts are loose on the pressure plate the diaphram releases and...

I know this sounds dumb but, I am trying to install the rod from clutch pedal to zbar, I got the kit from brewers with the clips for the clutch rod but I am not sure how they go on. The hole is offset from one side to the other so if you look directly at it u see part of the other side of the...

Is there special bolts that hold the pressure plate to the flywheel that have a shoulder or something that bottoms them out when torqued? Or some kind of spacer between the pressure plate and flywheel. I am converting my dart to a four speed and trying to install a mcleod clutch and pressure...

Does anyone know, which pilot bearing I will need for a 4 inch scat crank. I ordered the ram brass bushing from summit and it's to small. I think I am going to have to use a bearing type that goes where the converter used to sit. I'm hoping for a part number if anyone has ordered one of these. I...

I've went through alot of these posts and have'nt found all the answers I was looking for, so I will try a new post, sorry for all the questions in advance, first time swapping to a 4 speed. I just got a 4 speed conversion kit off of ebay, comes with bellhousing,fork,zbar,clutch and brake...