Search results for query: *

I have 8 Bosch WR8DP plugs for sale that were bought accidentally be me. They have no run time on them at all and are in new condition. They fit the old style LA heads and not the the newer Magnum peanut sized plug holes. DOH! I am asking $25.00 for eight of them plus the shipping cost from...

I have a used HV Melling oil pump for a small block. It has the Mopar pressure relief spring kit in it. It was used in my 273 for around 1000 miles so it has lots of life left. Asking 25.00 for it ad it'll ship from 48182 zip code.

I have a pair of 452 heads that came off a running engine. They were never removed till I took them off. I'm asking $80.00 for the pair and I'm going to the Nats and can bring them down with me. If shipping they'll ship from 48182 on your dime.

I have a RV 2 compressor for sale. It came off my 67 Barracuda and also includes the brackets that bolt to the intake. I replaced the front bearing with a new one and it was dissembled and had all new gaskets and seals installed. It was converted over to R134 and the clutch worked when I...

I have a pair of stock 273 heads that came off my 67 engine. They have some rust on the machined surfaces and will need to be cleaned up. They have been angled milled to a closed chamber head for a bump in compression. All the valves were bought new and there's about 2000 miles on the valve job...

I have two small block torque converters for sale. The green one is a stock stall unit that fit 67 and earlier 904's with a neutral balance. I bought it as a rebuilt unit and put about 3000 miles on it. It worked perfectly as you would expect from a stock converter. Asking $30.00 for it...

Up for sale is a left and right side exhaust manifold set off of a 273 engine . They came off my car so I know that they fit 67-69 abodies. There in great shape with no cracks or repairs. I'm asking $60.00 for the pair and the shipping is additional. They'll ship from 48182. I can deliver...

I have for sale a fixed seven blade fan and the spacer and bolts. It's in very good condition and looks to have been powder coated sometime in it's life. I am asking $35.00 plus shipping from 48182.

I have a discontinued M1 intake for magnum headed small blocks. It will need to be tig welded to repair the crack in the #7 intake port. I have no idea if it can even be done or not, that's up to you to do. I'm asking $35.00 plus the shipping from 48182.

I have a used Comp Cam hydraulic lifter cam. I had it in my car for about 500 miles and it was just to much cam for my car. It comes with Lunati anti pump up lifters that were removed one at a time and carefully marked which bore they came out of. I'm asking $100 plus the shipping. It'll come...

HeyAll! I have a Comp XE 274 cam that came out of my 340. It has 400 miles on it if that and has very little wear. Most of the parkerizing is on the ramps and just worn off the nose. Also included are the Crane Anti PunpUp lifters. All the lifters have a nice circular wear pattern on the...

A local machinist her has a 72 stock bore 340 block for sale. It was cleaned and crack checked. It will need to be bored .030 over. I was in his shop Tuesday and he asked me if I knew anyone that was looking for a block. I don't have any pictures but I can get you in touch if you're...

I have a like new shroud, Mopar part number 2998324. It is in like new condition with no cracks or pieces missing. I will post some pictures up Monday if theres' interest in it. Asking $85.00 plus shipping from 48182. The part number says it's for a slant engine but I had this on my 340 car...

I have eight Bosch Platinum Plus spark plugs that have never been used. The part number is WR8DP. Asking $20.00 plus the ride from 48182.

These brackets fit a small block with a cast iron water pump and uses a Saginaw pump. There kind of rare as most early small blocks had Federal or TRW pumps. With these you can step up to a Saginaw pump on the 69 and earlier small blocks and get firm feel steering. Mopar Action magazine had a...

I have the power steering pump off of my car for sale. It comes with the brackets and the hose. The pump has had new seals installed and does not leak. It functions the way it's supposed to. It fits small blocks with a cast iron water pump. Asking $50.00 and the ride from 48182.

I have the cast iron master that was on my car for sale. I was using it with manual disc brakes and the pedal pressure was hard. The bore is 1 1/8 and is the size needed for power brakes. There were no leaks. Asking $35.00 and shipping from 48182.

I have a Mopar starter that I took off my car. It was rebuilt at a auto electric rebuilder locally. It works flawlessly and it is a USA made piece. I'm asking $50.00 for it plus the ride from 48182.

I have a used ring and pinion for a 8 1/4 Chrysler axle. It's a 3:23 ratio and it's in good condition. It came out of a 73 Dart Sport axle that I put in my car. Asking $55.00 for it and the cost of the ride. It would ship from 48182 by USPS. First person to respond to the thread gets first dibs.

I have the 68 340 exhaust system on my car right now and was thinking of going to headers this winter. With the high cost of TTI headers I need to sell my present system to finance it. I have the 68 340 exhaust manifolds with no cracks or leaks. The will come with all the sleeve nuts and...

what I have here is a set of 8 intake and 8 exhaust Mopar stainless steel valves. They have 3/8's stems and the intakes are 1.92 and exhaust are 1.625. I bought them to put in a set of LA "J" heads for my 340, but when I had the heads cracked checked, one of them had a crack. Changed course and...

I have the booster that came off of my 67 barracuda. It worked as it should when I took it off the car. Asking $90.00 for it plus the shipping. It will ship from 48182 via USPS. First response to this thread has dibs.

I have five used pistons, a complete seal and boot set that was used for a few years. Also there are four unused new boots in the wrapper. There is a set of brake pads with a lot of life left in them in there too. Asking $25.00 for the all the parts. First post in this thread has first dibs...

I have four ARP main bolts for a small block. They have never been torqued down and they come with the hardened washers. Also I have four used windage tray main bolts with the tray screws. Asking $30.00 for all or I can separate them. They'll ship from 48182 at your cost. First post in this...

I have a Torker intake for a 440 that I've had for years. It's in very good condition, and there are no cracks and it has no repairs for cracks. There no grinding marks in the ports and the head to manifold surface has not been milled. I chased all the threaded holes with a tap and none are...

I have a Mopar script battery case for sale. I bought it new and it lasted about 2 years before it went bad. :banghead: I planned to install a trunk mounted battery and run the cables to this one to keep the stock look. Or buy a small Oddessy battery to fit inside. I would want $100.00 for it...

I have a 67 small bolt 7 1/4 axle that I took out of my car and was wondering if anyone wants it. It has some good parts on it but it's going to the scrapper this week. Shock plates and u bolts are good. Brake drums and shoes are in good useable condition. 10 x 1 3/4 Backing plates are very...