Search results for query: *

hey all I have 8 or 9 of these on the shelf. we no longer use them in production. selling a little cheaper than retail price with free shipping. PM me your email address and I'll put you in touch with my parts guy! Located in Kearney Nebraska. but will ship free. Thanks. Xtreme Energy...

These are out of stock everywhere, and we only do Magnum headed engines currently, so posting here to move one last LA airgap intake. New in box Edelbrock 7576 RPM AIRGAP intake, 8579 bolts, and actually have 2 sets of 7276 gaskets. First come first serve. approx 425, plus $12 shipping, and...

Good Morning, I have 1 Each of the Below listed Distributors, which I have reduced the price on. They have a Billet Body, and resemble a Mallory unit (in my opinion) They come with a male cap, but a female is avail for purchase. ECONOMY BILLET READY TO RUN DISTRIBUTOR CAP & ROTOR KIT | FEMALE...

I have a complete (what appears to be recently rebuilt) 741 open carrier. With 3.91 gears. Fully assembled. Just uninstalled. Stock axle spline. What I would like to trade for is a set of 2.76, 2.93 gears, or straight up swap carriers with someone. I personally have no carrier type...

Turbo action shifter in good working condition. comes with everything to install in a mopar with a 727/904. shifter, cable, trans bracket, cable mounting bracket, and the required hardware. Shifter comes complete and ready to go. Does not come with console, as it's built to my car, and too...

Hello All, I know some of you guys get into the A518, A618, 46RH/RE, 47RH/RE transmissions for your magnum swaps and such. Here is a brand new Hughes converter that someone ordered, and then backed out on. So now i'm stuck with it until one of ya'll buy it from me at discount :) Retail on...

Hello all, For sale is a Head change kit for a 09+ Hemi Eagle engine. This includes both head gaskets, and a complete bolt kit to install heads on a mopar 5.7 hemi, 09+ engine. You're welcome to double check the PN's as I think you'll see what a great deal this is. These are genuine Mopar...

Hello All, for sale is a brand new, Edelbrock intake PN 24751 POLISHED FINISH!!! This is an item that a customer ordered from us, and then cancelled, thus sticking me with it. retail on this intake is $713.95!! offering up for $499. This transaction will net negative for me, I would just...

For sale is a Holley 650 CFM SPREADBORE CARBURETOR. I see this as an awesome/easy way to run a holley, while keeping a stock spread bore intake. This does have some mopar apps listed as OE replacement also. Dodge/Mopar 1967-69 318,383,440 Retail on this is $497.95. Offering up...

BRAND NEW IN BOX This is a $700 intake on sale for $575. need it gone before friday or it's going on ebay as a buy it now listing for $600. Free shipping. POLISHED. it's in a new unopened box. the pic is of a regular version- stock photo. ED-24751 - Intake Manifold, CH-6B...

I have 2 of these in stock, and I'm offering them to you guys before i dump them on ebay. BRAND NEW, IN BOX. Edelbrock, black 14073 carb (s) The 5% pace discount does not apply as i'm offering these on mega markdown as is. paypal or card over the phone. $355 shipped free. retail...

For sale is the engine and trans from a 79 magnum with 50k miles. Was recently running and driving. Can verify mileage. Asking only $500 44460 ohio

For sale are a few Brand New Edelbrock fuel line kits with crush washers and banjo fitting. This is an edelbrock 8126/3 that i have on overstock / demo. The 8126/3 typically comes with a commonly discarded inexpensive hose barb. Our edelbrock 8126 does not have this, as most customers chose...

For sale is a brand new Holley PN 550-401. Again new and in a sealed box. This kit retails for 2000-2100 depending where you look, and i'm offering it up for $1800, which includes free shipping to the lower 48. The reason for the discount is that holley changed the PN on future kits, so...

For sale is a dyno time only, Fast EFI kit. Pn 30227-KIT. We used this kit once on the dyno before it was put back in the box. I don't even think all of it was unpacked. I believe we dyno'd it with this setup and the customer decided to go with forced induction, so at that point we got stuck...

As the title goes, I have 8 carburetors for sale that were either used as displays in my store, or were used on our dyno. All may need some adjusting or tuning. Will give descriptions, and get some images below. I can run a CC over the phone from work, or take paypal. If paypal I do need to...

Brand new, Got it in on an order for a customer and never ended up using it. price is $215 shipped anywhere in the continental US. This 100% NEW high-performance distributor produces a 50,000 volt spark through 7,500 RPM. Easy 1-wire hookup, low-saturation ignition module, premium cap...

just wanted to pass this along, and i hope i'm not breaking any rules, if so please remove. anyways, on rock auto, there is a mfg closeout going on for pn TRW 13238A they are only 3.50 plus shipping. these camber bolt kits appear to be over $30 everywhere else i could find them...if...

Hi all, For sale is a set of up upper control arms, and lower control arms off of a 74 dart. I'm moving to an HDK setup so i have no use for these anymore. The 1974 dart they came off of is a 30K mile car that has seen nothing but the drag strip for the past 5 or so years. They are as they...

As some of you saw in my other k member thread, I am selling a complete aftermarket summit racing disc brake setup from my 1974 dart. The brake kit comes with spindles, large vented rotors, new calipers+brackets, pads, bearings,hoses. I just took them off my 74 Dart, which currently drives on...

For sale is the factory k member with aftermarket summit racing disc brake setup from my 1974 dart. The new brake kit came with new spindles, large balljoints, large vented rotors, new calipers, bearings, and these are now all installed on my dart, which currently drives on the street and runs...

For sale is a recently rebuild holley 1050 dominator. It ran great when removed. I rebuilt it at the end of last season when I replaced a fuel bowl. I ran 90 jets all the way around. I haven't run it yet this season as i upgraded to a brand new 4500. Should just need some minor tuning and be...

For sale is a complete fuel sender that worked when removed. I went fuel cell and saved this piece when i pulled my factory tank. It worked when removed several years ago. looks to still be in working order with an intact float, strainer, electrical wire, and no corrosion. asking $40...

For sale is a fullsize starter that worked when removed before winter. I had to go mini for my 2 inch headers. The starter was on my car for 2 summers before removed. asking 25 bucks. prefer local as this is one of those items that probably isn't worth shipping. 44278

For sale is a Brand new, in box, Lunati Voodoo cam and lifter kit. Originally intended for a big block project car i have since sold. The specs are as follows... http://www.summitracing.com/parts/lun-10230704lk/overview/make/dodge Cam Style:Hydraulic flat tappet Basic Operating RPM...

For sale is a brand new, in box, summit racing brand distributor. This is a very nice performance distributor. I had originally purchased it for installation in a big block car, but i have since sold off that car, and i only have smallblocks now. The only thing i did was put an MSD style plug...

Hello all, I have a set of brand new, still sealed, Green bearings for the use on a 8 3/4 mopar rear end. These are still in the factory sealed packaging! looking for $65 shipped OBO Thanks guys!

for sale is a set of 906 heads. they are wearing factory blue, and have what i assume to be aftermarket valve springs (red in color) would make a great core set, or great for a freshen up. location 44260. asking $100 Thanks for looking!

having a garage sale this weekend and figured i'd make a small list of the mopar odds n ends i have laying around. Ebrake handle off of a 74 dart. great shape. $30 gas sending unit that worked when removed a few years ago. $20 stock oil pump out of a 360 with pickup tube still attached...

for sale is a set of brand new dual valve springs with a damper that came on a set of brand new aluminum cylinder heads. here are the specs of the springs right off the instruction sheet. i also double checked the measurements with a micrometer. asking 125 shipped. 1.539 outer valve springs...