Search results for query: *

Just built by PTC. I’ve decided to go with a Circle-D converter I already installed and don’t want this one sitting around. This is a 9.5” Spragless unit setup to stall around 3500 RPM. It was spec’d for a turbo or nitrous high HP street/strip application. PTC said it would be good for 1000HP...

Derale 16759 Fan Controller. Used, complete and 100% operational. Adjustable turn-on temperature from 150-240 degree farenheit Turn-off temperature is preset at 10 degree farenheit below turn-on temperature Push-in radiator probe Heavy duty 40/60 amp relay These are $65 new. I’ll take $40...

Nothing wrong with this WP. Has probably less than 500 miles on it. I swapped it out for the CVF model to more easily block off the bypass and heater hose ports. $25 + Shipping. PayPal preferred. Pics ———

Single groove water pump pulley in good shape. Was on my motor for the last 5-6 years. $30 +shipping. PayPal preferred. Thanks!

This is a powerful little compact fan for tight spaces and 22" radiators. I had this on my Early A body. It's for a Chevy HHR application and measures 22.5" wide by 18" tall and is a little under 4" thick at the motor. I'm including the adjustable Derale 16759 Fan Controller with temp sensor...

AutoMeter Ultra-Lite Pro-Comp II Tachometer, 5” with memory recall. Works great. Just removed from my car. $125 shipped to lower 48. PayPal preferred. Thanks

Equus brand gauges I ran for a while. They all work great. Oil, water, boost/vacuum, volts, fuel. $125 shipped to lower 48. PayPal preferred. Thanks

This came in a 727 I bought off my buddy after he switched to a PG and I don’t think I’ll ever use it in my mostly street car. I believe it’s an older Tranzact valve body but there are no markings to confirm. $350 shipped to lower 48. PayPal preferred. Thanks

KEVKO M302 360 oil pan and pickup. It has a 1/2” NPT bung in the front pass side corner for turbo oil return but can be plugged. Overall in good shape. A few dents and dings.Full specs are here: M301 - 340M302 - 360Stock Location $200 shipped to lower 48. PayPal preferred but I’m flexible on...

Very clean 5.9 Magnum rear sump oil pan - $100 Magnum timing cover - $50 Magnum accessory bracket with idler - $50 Pulley - $30 ———— Shipping to lower 48 included in each price. Make me an offer on the whole lot and that’ll save on shipping. Thanks

Brand new in the box fully assembled CNC ported heads, head studs and 1.6 rockers. I don’t think I’m ever going to get these installed so they should go to a good home. Sold as a package. $1900 shipped to lower 48. PayPal preferred. Part Numbers ———————- Heads PCE281.2151 Head stud kit...

This started as a brand new fuel tank and then I added the sump. Sump has 2x 3/4” NPT female bungs. Tank is clean and rust free. I’m including the tank strap/bolt and sending unit with 1/2” pickup. I used the sending unit as my return line for my turbo FI setup. $200, shipping included to...

Selling my old Turbo setup. This was built for my Early A, so should fit most anything since the Early A's are so narrow in the engine bay. If you are thinking of turboing your small block, this kit will get you miles ahead. All of the hard work is done. My full build thread is here: Ebay GT45 +...

This is I believe a ProComp SBM Distro I bought from Pace with Summit 6AL box, locked out with phasabe rotor plus MSD Adapt-a-Cap and matching phasabe rotor, has MSD pickup installed plus original pickup, regular cap plus cap with hole in it for accurately phasing the rotor, original weights...

Mopar Performance #P5007140 Magnum heads. Listing for a buddy. They were on a turbo 5.9 magnum build before he swapped to aluminum. Heads are complete, minus rocker gear. Unported, springs are good to .600 lift, he was running a .570 lift cam. They have stainless 2.02 intakes. All threads are...

New, never used, still in box Taylor #51072 8mm plug wires for big block Mopar applications. $30.00 shipped to lower 48. PayPal only please. Thanks.

1200 PA For sale. Used but complete. Have box, handheld, O2, new harness connectors I purchased from Fitech. Has a new ECU, replaced by Fitech in December (1 year warranty) after I accidentally bricked it during a firmware write. Has latest firmware with 2-step. FPR block off and original fuel...

Has provisions for tranny cooler lines, the mounting brackets have been cut out in a few places when I moved the rad forward in my car. One small pinhole that was patched (see pic). Does not leak. Shroud is from a slant 6 I believe that I modified to fit the radiator. **$150.00 shipped to the...

$75.00 shipped to lower 48. PayPal only please. Located in S. Florida.

Oregon grind #1357. Specs here. Hydraulic Roller Camshaft Specifications Great cam for you Magnum swap guys. With EQ heads and a stock 5.9 Magnum my car went a best of 7.90 in the 1/8th N/A with this cam. Video of first start of the engine with this cam. Has a nice idle. $175.00 shipped to...

Upper and lower pulleys. $25 each + shipping or $50 for both and I’ll cover shipping. PayPal only, located in S. Florida.

Very clean, includes mounting nuts, throttle cable, outside firewall gasket but no actual pedal. $100.00 shipped to the lower 48. PayPal only please.

For 8 3/4, 29 spline. New, never installed. I lost the straps but they can be purchased for about $10.00 from Denny's or elsewhere. $50.00 plus shipping. PayPal only please. Thanks.

These are all from a 1971 and up, non-lockup 727. 1.) Pump + Input shaft $40.00 2.) Loaded front clutch with 4 frictions $40.00 3.) Loaded rear clutch $30.00 4.) Factory valve body SOLD 5.) Governor and park gear $25.00 Plus shipping. PayPal Please. Or make me an offer on all of it. I have a...

I'm probably never gonna use these. They are new in the box. Just a little surface rust. $20.00 Shipped. PayPal only. Thank you.

SBM chrome water necks, qty 2. $20.00 Shipped. PayPal only. Thanks!

Clean small block valve covers with breather. I might have the other breather also. I'll throw it in if I find it. $60 shipped. PayPal only. Thanks!

For your turbo build. 4150 low-profile, O-ringed, divided carb hat. Needs a new O-ring ($10.00). These are $195.00 new. $160 for mine including the reducer and shipping to the lower 48. PayPal only. Thanks. Unpolished Aluminum 4150 Series O-Ringed Carb Hat

I have two of these Quantum 380LPH Inline pumps. One is brand new, never mounted, the other had less than a tank of gas through it. I decided to swap to a single bigger pump. These are great little pumps, same footprint as the popular Bosch 044s. They are essentially a re-branded AEM. Full specs...

Small block, LA. In excellent shape, untouched ports. I just pulled it off of my car to replace with a single plane. All threads are good. **$275.00 shipped to the lower 48. PayPal only please.***