Search results for query: *

New never used and only opened for pictures. A Dorman 594-132 harmonic balanced for ‘84 - ‘93, 360 engines. Comes with Dorman supplied crank woodruff key. $160 shipped in the 48.

NEW! Mr. Gasket heat dissipator spacers. States 1/2 thick. New, never used, un opened. $30 bucks The below are used. Edelbrock “8715” divided spacers, only the spacers. $40 bucks Summit 1/2 wood 4 hole spacer. Holley bolt spacing. $20 bucks All parts prices are shipped in the 48.

Used a short 2,500 miles on the son’s truck, swapped for a different intake. In excellent shape, comes with pictured fittings and temp sender. $250 shipped in the 48.

Early style water pump used for 2,500 miles or less. Includes what you see. Excellent shape. I went to a high flow pump for the high output engine. $40 shipped in the 48.

Just the bars, nothing else. Threads are good. $40 shipped in the 48.

1 - 9636 - AFB - $40 shipped 1 - 1806 - AVS - $40 shipped 1 - big- T/Q 6545 - $40 shipped 1 - small T/Q, Electric choke MoPar throttle arm, easily to rebuild. - $40 shipped All prices for the 48.

Up for sale is a 9027 big TQ that was used on a 440. The “Zannth” papers say it was on an IH engine. It’s ready to bolt on and run. You adjust it for your engine. Has the original jets and rods. A non emissions carb with a full time vacuum port at the rear and the normal distributor advance...

This model 9800 is a small primary TQ with the Chevy throttle arm. $250 shipped in the 48.

An excellent rebuilt 440 AVS carb. It never got to use this myself. Asking $200 plus shipping in the 48

Up for sale is a Comp Thumper cam and lifter set in good condition and removed in favor of a smaller cam. It was used in 360 - 4spd manual ‘91 W150 for 3 months with less than 5K miles. The cam broke in well, lifters are in the proper order, see pictures below. Asking $250 shipped in the 48.

Recent upgrade to handle a more powerful engine, this will s the original radiator out of a ‘68 Cúda. Small dent on the bottom. Doesn’t leak anti freeze. $200 shipped in the continuous 48. Includes cap and petcock. PayPal OK

Up for sale is a set of 16, 3/8 thick, 1 piece Chrome Moly oil through 3/8 .080 wall pushrods @ 3.735 in length from Brian Tooley Racing. New! Never used. Out of the package for pictures only. $100 shipped in the 48 states. PayPal OK. PM me.

Below are pictures of a ‘91 - V6 I’m dismantling and will be scraping soon as I have no need for anything pictured. Any part in the trucks bed is $10 plus a box & shipping anywhere in the 48, Canada slightly extra, sorry my northern brothers. PM me for what you want. PayPal OK. ( broke dip...

I have up for sale the pictured below Summit racing oil pressure and water temp gauges pre mounted in a bracket at 2-1/16 size. All parts in the bay are sealed with instructions and a 90* metal bracket. Selling new at Summit for $29.99, you can purchase these new and never used units for $25...

I was told it was Lunati Bracket Master cam for a small block and I looked up the numbers. There is a 2 stamped on the cam and a 1 in the on line catalog. It otherwise seems to be in the brand new condition I told it was with the parkerizing still on the lobes. The cam was installed and never...

These were on the J heads I have for sale. Used with the MP purple Hyd. 292/.509 bracket cam. Springs, retainers, $60 - OBO, shipped in North America.

I have these builders. 2 heli coils on the Siamese exhaust ports, 1 on the heads end. No porting done. Both heads are a 915. I can ship these in a single box @ 13 x 9 x 22. Shipping is expensive! Approximately 100lbs. I’d just like to get rid of them besides going to the the local dumpster...

Super low miles, K$N filter, minor blemish because I’m clumsy sometimes. $120 shipped.

This linkage is by Edelbrock. It can be made to work 1:1 or progressive. $40 shipped.

Barely used, excellent condition, $50 shipped.

I out a kit in this carb, tested it on a dual plane dual quad 360. No issues. It has been sitting a while, it is dirty and dusty. $125 shipped

Used 1406 AFB. I gave it a kit, tested it for a couple of miles on a 360 - dual plane dual quad. A little dirty and dusty. $150 shipped.

I have this modified D-64. Pictures below, you can see the dremels work in changing the bolt angle pads. The intake seals fine. It is otherwise stock. Zero issues when used. Port size roughly 1.02-1.06 X 1.97-2.00 There is some minor variation in the untouched ports. No port work or plenum work...

Up for sale is a March P/S pulley for a serpentine set up. It is a six rib unit at 4.95 (inch) absolute outside diameter The hole to press onto the P/S shaft is 47/64 or .746 for a .750 (3/4) shaft. The pulley is used. This is not a perfect looking piece and has some scratches and such. I have...

I went another direction. Cam break in time only. Zero issues. $100 shipped, OBO. The most minor cosmetic blemish pictured last. COMP Cams Magnum Solid Camshafts 20-248-4

I have for sale 16 of each of the following; Hyd. Cam Valve springs at 1.46 diameter (specs below.) Steel Retainers 1 grove locks This, I will sell as a package only. They came off of my wife’s ProMaxx cylinder heads in flavor for what I need to have on them. These are (again!) New, never used...

Up for sale are a pack of un used valve spring shims from Comp Cams. 1 package opened only to discover there not the correct diameter needed. .015-.030-.060 thickness. 48 shims in total. Click below for info @ Summit racing. $20 shipped. COMP Cams Valve Spring Shims 4756

New in the box for a 4.06 bore. I never opened it. Searched and found the ring pack should be 1/1/6-1/16-3/16. $60 shipped USA -OBO

New in box. I have no need for these. MP normally used a 1/16 - 1/-/6 - 3/16 ring pack for there slugs. I never opened these up. $60 shipped USA OBO

I opened it up, said that’s nice, now I have 2, so, this is for sale at $60 shipped. USA