Search results for query: *

so my dart is on jack stands, and i can spin the wheels in every gear, even park. the drive shaft is turning the slip yoke. the car is not running so i can not check it under power. i feel like this is not normal. my reason for asking is the motor needs a bunch of work and parts to run, but i...

i recently aquired a 72 swinger with a /6 and 904 from a 68 barracuda. the p.o. could not get the engine swap figured out and sold it with the 68 stuff installed but not all buttoned up. he said he never took the shift linkage out of the car. So i went ahead and hooked up the shift linkage and...

i came across a sure grip unit that looks like it had bad issues. it seems the gears came off while it was rotating? there is also what looks like a hole welded up through the body? it kind of looks like it was rebuilt since the issues?

I just picked up a 1986 ram royal 150 van. its basically a B-van. going over the fluids and what not just getting to know her, The trans dip stick says use dexron on it. I have always atf+4 in every mopar from old a-body's to my 98 ram truck. I plan to drop the pan and do a filter service should...

CAN YOU PLEASE HELP ME IDENTIFY THIS TORQUE CONVERTOR? the hub that goes into the trans side is 1.88", with slots that are .47". and the hub that goes into the crank is 1.8". the ring gear is 13.25" overall, with a 1.011" lip to the T.C itself. it has a bolt spacing of 10" across.

getting my rear ready to put in the vehicle, where have you guys been getting your drums? small bolt, 10" drums with flair out. i would like to rebuilt the entire brakes hard ware and all. any advice as to where to get all the parts in one place? nobody local has them, napa says they can get...