discharger1332
Well-Known Member
CAN YOU PLEASE HELP ME IDENTIFY THIS TORQUE CONVERTOR?
the hub that goes into the trans side is 1.88", with slots that are .47". and the hub that goes into the crank is 1.8". the ring gear is 13.25" overall, with a 1.011" lip to the T.C itself.
it has a bolt spacing of 10" across.
the hub that goes into the trans side is 1.88", with slots that are .47". and the hub that goes into the crank is 1.8". the ring gear is 13.25" overall, with a 1.011" lip to the T.C itself.
it has a bolt spacing of 10" across.