Search results for query: *

I would like to find a rebuildable 170 for my 1964 Valiant. I am driving it now, so want to minimize down time. Prefer a 64-67 (small hole register) if possible.

I would like an 8.25 rear end to put into my 64 Valiant. ideally it would be drum to drum and not trash. 3.21+ ratio would be nice, but not mandatory. Barring that I would take a complete BBP 7.25 IF it had a 3.21 or higher ratio...and wasn't sloppy. I would take an 8.75, but those are gold...

I would like to find an early 170 (preferably) or an early 225 somewhere close in Texas. (Kerrville or San Antonio areas) I would love it to be a 64-66 to fit my Valiant. It is something that I would like to build on the side while driving the Valiant. The more "free" the better. Anyway...

I have been dicking with my dart's circuit board for 3 years now. Tired of it now and cannot pass inspection because the left turn signal indicator won't work....broken circuit. I have seen earlier ones on ebag....anyone have a 72 circuit board that they know is good....OR a NOS one? Let me...

I am in need of a complete 3 speed shifter set up for an A230 in an a-body. I need the linkage, adapter, shift rods, handle...the whole kit and kaboodle. Shipping would be to 78010 Thanks. sb

Need a floor shifter for an a-body A230 transmission. I would need both shift rods, the handle, and the adapter to mount it to the tail of the transmission. So, basically everything shifter related. Thanks. sb

Looking for distributor hold down for a slant. Would like two if they are out there...the one I would like is for 81+ years and looks like the pics below: Thanks to Darnarchy, from whom I borrowed the pics. sb

Looking to pick up two (2) small block mopar electronic distributors for non-lean burn applications and one (1) slant six distributor of the same type. Would also like to find 3 limiter plates like the ones from 4 seconds flat...but I know that's a long shot. Anyway, let me know what you've...

Took apart the rear brakes on the 64 Valiant and someone left out the parking brake lever that actuates the e-brake. I found the spreader bar in a pile of parts, but no e-brake actuator. Came to a grinding halt....anyhow, if you have one you can throw my way, it would be appreciated. I have...

Looking for a 230 3-speed with floor shifter to put behind my slant that currently has the 903 in it. I know of one in a JY in Killeen, TX, but they don't have the shifter. Whatcha' got? sb

Title says it all. I need a flywheel for a 68 up slant six. Thanks. sb

Looking for a standard ignition (points) distributor for a 318. Cost plus shipping to 78010. Looking to get a working piece. Thanks, sb

Would like to pick up an 8.25 rear end in the San Antonio - Kerrville(or nearby) area. If anyone has one let me know. A complete rear end would be nice, but a housing and axles would get me going. Thanks.

I have no shroud on my car. It is about to be put back on the road, so I need a shroud. It is the non-heavy duty/non-A/C 17"x18" radiator. If someone has the correct 22" fan shroud, I might take that and upgrade the whole deal by getting a bigger radiator. Let me know what you got. sb

Looking to get a fender. I am looking for minimal rust. Thanks.

Looking for a mirror for my 72 Dart. It has a remote mirror on it, but I am not picky. This is a daily driver deal, not a restoration. Let me know what ya'll have out there. Shipping would be to 78065. Thanks.

Looking for a regular old non-remote mirror for a 72 Dart. Shipping to 78065. sb

I need 4 rims for my 72 Dart. I just changed it over to BBP, I have a set of 14" SBP rims, would like to stay with 14", only because I have 2 new 205/70-14s, but if the deal is local enough and the price is right, let me know what you have. Thanks. sb

Looking for 1972 Dart tail lights. Just something that will pass inspection and not fall off! Not doing a concourse resto., just a daily driver. Shipping would be to 78065. Thanks, sb

Gave up searching for a 7.25 Sure Grip, and have already found an 8.25 rear, but it is a 2.7x open rear end (of course.) I have decided to go with 3.21s since I will be running a 25-26" tire. Wanted to see if anyone here has a usable 8.25 Sure Grip to sell. Thanks, sb

Looking for a 7.25 sure grip carrier. Prefer the larger numerically carrier, will be running 3.2x gears probably. Will take an entire axle if close by in Central Texas. sb

In need of a slant six 727. Thanks, sb

i need a slant six. prefer a 1968-1975 motor, but will take any that need a new home after you yanked it. i also need a tranny for that set up. i am in SAN ANTONIO, TX but willing to drive a reasonable distance for the right motor! [email protected] or pm me here. thanks, sb