Search results for query: *

Replacing fixed bushing 2" on leaf springs . The metal bushing sleeve comes out also , right

[www.facebook.com/1093221331/posts/10226820847442590/ ] Sold this a year or so back. I custom made the hood using 69 GTS hood bulges. The guys close to finishing it. He's supper excited . He did his own paint .

Before in black, Now gray Needed a change

I've been kicking this thing around in the garage for the last 12 years. I know its a molding but to what. Fire wall , radiator. Has staple holes. ? Wasn't on car when I got it. Doesn't seem to match anything

Motor mount question. I thought I had 318 motor mounts was going to use them on a 72 340. Driver side mounted with spacer but bisket stud was abought 1/2" from mounting hole. Engine is set right everythings square. I may have a truck mount. Anyway I cut the center out of the mount , thinking I...

Is this the correct washer pump for my 68 Dart ?. The mounting holes dont line up. Floor board holes are too wide. Does anyone have a picture of theirs mounted. My manuals dont have a thing. Thanks

Im needing pulleys for a 72 340 block manual steering , a/c. I should be able to use pulleys as on a. a/c car using a idler arm .?

Rear shocks rub the gas tank . I have to bend tank lip up but are still very close. Driver side more so. No aliegnment issues , everything seems to be food. Anyone else have this problem

Abody 318 / 340 ?

Both are clutch style sure grips ... correct ?

I picked up a 70 Duster last year as another project thinking I needed another car. A year later Im finding out that may not be so and something has to go. The Duster would be a fun build and I have done alot so far like replacing left rear quarter and installing GTS pulges on the hood plus all...

I know this belongs on C-Bodies but thought I'd start here. A friend of mine passed away about a month ago and left these Chryslers that belong to his parents. Two "64"ish 300's and a New Port. the 300's are two door as you can see and the New Port a four door. the rust is surface and as best I...

https://www.universityautocenter.com/auto/used-1975-dodge-ellensburg-wa/45965591/ I've seen this on the lot . Its 30 mi from me. If I didn't have my hands full I'd be tempted. I can't believe its a four banger tho

I NEED TO HAVE A SET OF 69 340 INSERTS RECHROMED. ANYONE FROM THE SEATTLE OR SPOKANE AREA HAVE YOURS DONE ? MINE HAVE MINOR PITTING . WOULD YOU SHARE WHO DID THEM AND COST. ALSO LOOKING FOR A GOOD SET OF 340 CALL OUTS. NOT IN A HUGE HURRY ON THIS STUFF. THANKS ZIGS

I need to upgrade my gauges in the future. Right now I'm using Bosch which are cheap, I need to move up into a little better quality. I've just gone through another temp guage need something more stable. I don't want mechanical. whos using what and how is it working for you, Thanks Zigs

Got my 72 Duster LH rear quarter panel for my 70 Duster. Got it somewhat into place . once I have it squared with the door and body lines I probably need to tack it here and there. I thought there would be spot weld holes where needed but not. I have a flanger with hole punch. Is that the way to go.

While waiting for new panel to show up, Iim removing old panel. Everything is staight foreward until I get to the side panel to roof seam. Ive removed the led but it looks like the edge that runs along the drip rail 90's back into the body. Any suggestions

Looking at a down shaft for console auto shifter but I think its from an Ebody. Will this work in an abody . Top arm isn't the same. javascript:;

Changed sure grip from cone to clutch from Dr Diff. Put everything back together per shop manual . I end up with an 1/8" gap on driver side. Pass side sets correctly . I've done this three times now with same results. I have no binding everything went back in no problems. Is that gap a problem...

I have a chance to get a set of bucket seats but the guy thinks their from a Cbody. I know the tracks would be wrong but would the seats physically it a 70 Duster with console. thanks

I'd like to get some direction here. I have a bbody 8 3/4 from a Belvedere . I have searched but can't find an article from someone on here that used a "B" on an a body without cutting the axle housing using 16 or 17" wheels. This is for a 70 Duster . Anyone know this article

I'm selling my AC/Heater unit out of my 70 Duster . Does anyone know if it will fit a 74 also. Thanks

No , it wasn't the taco. I pulled the gas tank on my new ,old Duster. I've heard about gas getting so old that it will turn to a varnish. About 2 gallons in the tank. My wife came out and asked me what I was varnishing . Sending unit totally ate up.

I pulled the front seat out of the Duster I just bought and found this. Looks to be heated seat hook up or electric chair connection. Is this after market or did some Dusters come with heated seats or what is it.

I have a chance to buy a 70 Duster. By add picture seems to be straight. Was a /6 car but he has a good 360 he was going to put in it .I've requested more pictures , lots of pictures . He's a 100 mi away so I'm a little skiddish . He's asking $1000. For the car $1500 for car and 360. Its...

Anyone on here rework gauges fuel temp etc

Has anyone tried putting a 70 Dart instrument panel in a 68 Dart. Are they the same . does anyone have one out they can measure.

Found a guy that has a TRW pump and pulley non a/c BB . I'm needing a pulley for my Federal Non a/c BB. If the pulley is 5/8" shaft will it fit my Federal 5/8" both are press on . I've been told that Federal and TRW interchange in some cases.

Thought I'd pass this on Spokane Washington craigslist. By the pictures they look to be in good shape $750 1967 MOPAR 440 CYLINDER HEADS 2780915 CLOSED CHAMBER 915

Can't find a place for it , 68 Dart looks to be part of steering column.