Search results for query: *

Replacing bushings in my springs. Front eye bushings came out but there is a metal sleeve I'm sure is going to have to come out. Whats the best way. 2" front eye

I put QA1 suspension in my dart. Good stuff but when I went to back it out of the garage turning the steering wheel to the left , the front passenger tire rubbed. Both ways turning it rubbed tires are 215 65 R15. never had an issue before. Pulled tires and measured from back center edge of rotor...

Bought the QA1 level 2 front suspension. Everything has gone together great, nice product but having problem with sway bar installation. Looks like stableizer bolts are too short , cant get a thread started. Any ideas

What K-member is this. I'm hoping small block. I've tried matching up pictures but not finding any that match.

I picked up a 66 Belvedere manual floor shift steering column. It has no lower bearing. The rubber seal is there. I was told that it didn't need the lower bearing because the shaft was stabilized by the steering joint. Anyone know if this is true , I'm going to rebuild the column. I can't find...

Someone tell me is this a V8 or /6 center link. Thanks

I have a chance to pick up a /6 k frame with 318 motor mount conversion for cheap and close. will the 318 mounts fit a 360 also or is there a difference between 318 , 340 /360. I already have /6 frame in car

Well strut rods from a 68 Dart fit a 68 RR?

I've been reading about floating front ends . Add me to the list . I have a new federal pump and don't really want to tear it apart and shim . To let you know everything is new ,front end steering box , everything, and yes caster and camber are out of whack. I will address these issues first...

Putting power steering pressure line on . I have a new line and it has an oring . I switched from manual to power steering so no old line to go by. There were no pictures or directions and my manual doesn't cover it. So where does the oring go , on the female power valve side or the male pump...

The steering return hose fitting has a large and small o-ring . Are these special or can I use regular O Rings from my kit.

What is the spline count on the coupler input shaft power steering. thanks

Going to add power steering to the Dart this fall. 400 stroker , same as 383 so should be straight for ward? Between Saginaw and Federal who prefers what. I'd like some ideas. Oreilly's has a Federal lookalike that I hear is close to Moog for $57. steering gear for $105 + the core charges. Will...

May have been an old thread but someone was looking for a retainer clip . I found one on ebay. I'll try and transfer add but if it doesn't work here's the item # 301597101519 http://i.ebayimg.com/images/g/-PcAAOSwj0NUeURR/s-l1600.jpg Zigs

anybody replace their steering columns with after market ? If so does the mounting bracket fit the column shaft ok. I'm looking at a floor shift manual column. What about length , any does and don'ts.

Will a 1968 idler arm fit a 1973 bracket . I'm setting up for a 400 block.

Had problems with the steering in my Dart ( manual rack and pinion ) trouble is 354 Hemi can't use manual box , power won't fit also. I need to make room for exhaust on drivers side. I've been looking at the Ford steering assembly. My thought is getting a falcon , Fairlane or Mustang assembly...

I'm putting new bushings in the front end of my Dart. Thought I would pull the torsion bars and have a look. The numbers don't match up with any of the charts I have seen. The torsion bar on the passenger side reads 803L AJ on one end and 603L 480 I'm...

I have a friend that has a 68 Cuda F/B. he wants to put disks on the front. He has his eye on a 74? volarie, or aspen. What would be a good doner. what years and modles.