Search results for query: *

Found a pair of '64 Valiant doors in a salvage yard. I've been looking for '65 Dart door as molds for fiberglass replacements. Both the same less trim? THX

Doors from '65 Dart fit '65 Valiant?

Simple bolt in to replace'65 Dart column with 67+ non chest piercing set up?

Came across a '66 Dart that I am thinking of cloning a D Dart for road racing. Anyone have the original specs for the bell, clutch and flywheel and what's out there for modern performance?

How tight of a squeeze?

I'll be forming a rear glass out of plexiglass for a low weight '65 Barracuda. If all the same, then I might be able to offer them for sale. THX

I bought my '65 dart as as roller, so I have no reference. I'd prefer to run factory routed exhaust system with my 365 HP 273 and not modify the drivers tranny mount. Probably a 2 1/2 pipe. Seeing the route is better for me to see what's in store. Thanks

I found a link on this site several years ago, a white Valiant ran SS/K, I think, 273 4 speed. Lost the link. I believe the car ran out of MN and had Victory on the doors. Any help?

Any brackets or lenses needed if I swap out a '65 front and rear bumper for a '66?

For my last daily driver, 1965 Dart 4 door,318,400HP to be completed, I need a radiator. Saw this one at Summit 1965 DODGE DART Summit Racing® Performance Fit Aluminum Radiators SUM-384034 Any good or a better selection? Thanks

Found a pair of UCA from a 68 Dart that I owned in the past. I think I can bolt them onto my '65 Dart? What sway works if the UCA's are a go? Thanks

I think that the 63 was not friendly towards a V8. Found a nice 63(not a rust bucket and easy to be street worthy). I think the /6 is toast or close to it. Have a 273 on the engine stand. Will it fit? Fit with headers? Is there something with the heater core or wiper motor that's an issue?

What body parts are similar to swap, ext. and int.? I came across a 65 project car and found a 64 parts car in another location. Don't have either in hand, just want to know what would work if I pull the trigger. THX

Looking at the FAST class. What are the biggest factory installed tire for 1965 Dodge Dart 273/4bbl?

Converting strip car to street. Anyone know what mirrors, other than stock, would be a good replacement? Something with a sporty/aero look.

What do I need to put front sway bar on a '65 Dart. I have done the big upper controls arms and using the F body spindles and brakes. Moving the car from strict strip to street/strip. Thanks

Not much space in the trans tunnel for the 904, so I think that a 10 1/2 clutch and shield won't work. What's the solution? Fenderwell headers and to any problems?

Just picked up 1 of 2 FG fenders for my '65 Dart. The quality was worse than horrible. Found Valiant FB fenders for 64/65 Valiant/Barracuda. Can I use these instead? Dart look will be more of a hybrid but that's OK. Also found FG doors for '65 Valiant. Can I use these too?

Just checking if someone has a new lead on fiberglass fenders for a '65 Dart. Heard Sled City has them on a list but nothing in hand yet.

When I built my '65 Dart drag car, it was a tight fit for a 904. I heavily modified the trans hump to get the trans to fit easily and give me room for repairs and strapping on the trans blanket. Looking at another that has no trans. Thinking about a 4 spd. Can't see how a 10 1/2 clutch and...

VFN has fiberglass bumpers for a '66 Dart. Can I get them to fit on my '65? Changing out the bumper brackets the solution?

Mocking up some JR fenderwell headers for my '65 Dart. For a street machine, looks like u-turns and parallel parking are not going to cut it. 350 HP 273, so factory style exhaust won't do. These block hugging headers a solution?

Looks like 1 or 2 races this season will require a diaper to pass tech. With a narrower frame I assume that the later '67+ diapers won't fit. Anyone solve this problem?

1965 Dart and Barracuda have the same radiator supports?

Several years ago I picked up 2 front fender patch panels for my dart at a swap meet. Need new ones for a new project and can't find them anywhere. Any info? Did repairs with sheet metal before but now, time in not on my side for this project.

Putting together a 273/4bbl, 340 spec solid cam, high compression motor for a '65 Dart. Was thinking of using the magnum factory style exhaust manifolds. Good idea? Need the magnum bolt kit or just use the LA studs/bolts?

Looking for suggestions on aftermarket oil pan for 273 in early A body

Other than a bigger rear and an update of the basics, custom headers... how much room is there for a 440?

I saw a 5/16 and 3/8" outlet for fuel tanks on rockauto. I'll be doing my final 273 hipo build and the extra 1/16 is significant to me. Is this a typo or generous measurement? Anyone buy one and measure it?

I've been looking for FG fenders for my Dart . No luck but I could get them made for $1500.00, sending my steel as molds and the rest. Saw a '65 Dart being rolled out of a garage with no front end and I thought that it would look great, strictly as a track car. Any input on this look? I think...