Search results for query: *

Anyone ever moved the pivot point on the brake pedal to increase pressure output smd ease the amount of pedal force? I switched to manual 4 wheel discs and it’s hard to stop without a lot of leg. I’s there an aftermarket pedal that works?

Any using upgraded pads for better stopping on Kelsey Hayes 4 piston? Thanks

Got 4 wheel manual wilwood disc brakes installed. Hard pedal and car just wont stop good. Thinking I have a 1-1/32 now. Hoping a 7/8 master cyl will help. Any suggestions on which one too use? I have seen some posts saying use a 7/8 for pwr brakes. Thanks

Is the pedal ratio different on a drum vs disc brake? If so which set of pedals would I need to find to convert form drum to disc to increase pedal ratio and lessen leg effort? Thanks

Four wheel SSBC disc brakes on the car now with 4 piston fronts and single piston rears. Had a 1" bore wilwood master cylinder that just would not bleed after many attempts. So I put the disc/drum 1-1/32" master on that I was using when I had drums on the rear and disc fronts, and removed the...

What would cause the brake warning light come on when applying the brakes. This is a 69 Dart that has a sensor on the distribution block. Is it air in the lines? or too low of hyd pressure that this sensor detects? It was converted to 4 wheel disc brakes by SSBC and now not stoping good at all...

Has anyone successfully installed hydroboost brakes without having power steering? How do you plumb it? Tallon Hydraulics says the pressure out line from the hydro must go to a ps gearbox or it will not work. Thanks

Is the brake line block on a 69 Dart drum/drum car a proportioning valve block or just a distribution block?

Delima. Had just front ssbc disc brakes and rear drums and all worked good. Went ahead with adding rear disc now jamming on the brakes just coasts to a stop. Bleed them several times. Do I need a bigger bore master cylinder for 4 disc brakes?? Using a stock master cylinder and have a adjustable...

Has anyone tried putting a SSBC rotor on a stock KH setup to increase the bolt pattern to 4.5? Wondering if it will fit and align to the calipers?

What size are the KH rotors on the 71 A body cars? 11" or?

I am curretnly running the kelsey hayes 4 piston set up on my Duster. Has anyone tried to put 73 up 5x4.5 rotors onto a kelsey hayes set up? Wondering if they could be made to fit and line up with the calipers to convert to 5x4.5?