Search results for query: *

Looking for a full set of 69 wheel opening moldings. Before buying reproduction, thought I’d see if anyone has a set in good driver condition Please PM Thanks Jay

Looking for a clean drivers signal lens Please PM me Thanks Jay

I have the larger middle brackets for both front and back but missing all 4 of the smaller corner brackets that attach to the fender and quarters. Please PM me Thanks Jay

My 69 barracuda is missing the drivers door seal, see photo Looking for one in good driver quality Please PM me Thanks Jay

Looking for a pair of clean back up lights. Need housing, lights and lens Please pm me with offering Thanks Jay

Prefer one of those color coded and laminated larger ones Pm with offering Thanks Jay

Wanting a clean barracuda hood release, looks like this please PM with offering Thanks Jay

Looking for a clean drivers side signal lens Pm me with offering Thanks Jay

Looking for a clean 69 barracuda, drivers side outer quarter window fuzzy. Please PM with offering Thanks Jay

Need everything from housing, light and lens. Looking for left and right sides. Prefer clean with minimal pitting if possible Please PM. With offering Thanks Jay

Looking for a A body glove box button that mounts on the glove box door. Please PM with offering Thanks Jay

I am looking for a wiring harness use for the wiper motor, (from the firewall block to the wiper motor). Mine has been spliced and reworked to the point where I would not trust it not to burn the car down. Please pm me with offering or questions Thanks Jay

I am looking for a drivers side rear quarter window regulator and non A/C glass for a 69 Barracuda fastback. I am including a photo of what I need. Please pm me with what you have. Please figure shipping to Ft. Myers Fl. 33919 Thanks Jay

I am looking for a new set of factory seat covers (standard buckets and back seat in black) for my 69 barracuda. PUI has them but website says they are on 24 week wait list. Anyone have a set? Any suggestions on where else to check? I did not see them on ledgendarys website but will call...

Looking to buy for a 69 340, a right angle oil filter adapter Currently the exhaust down pipe is trying to occupy the same real estate as the filter. Please pm me, Jay

I bought a Disc brake conversion kit from pirate jacks, my 4.4 inch rims do not clear the calipers. I’m looking for two or possibly or all four, SBP 14 inch steel wheels with a 5.5 width to clear the calipers. Must be small bolt pattern. Please PM me with any offerings Thanks Jay

I am needing a good driver quality (little or no pitting) drivers side grill chrome trim. Please PM me Thanks Jay

I am restoring a 69 Barracuda, in the process of de-construction I managed to break about half the body bolts, fender bolts, the smaller header bolts, radiator bolts, and hood bolts. Does anyone offer a nut and bolt kit?

Looking for 2 14" Small bolt pattern stock steel wheels. I am not sure if they offered different size (offset) wheels, but I would be looking for wheels that could handle a disc brake conversion. Please PM me I am located in Ft. Myers Fl, 33919 Thanks Jay

Looking for a clean 1969 Barracuda header panel. Please PM me with photos Thanks Jay

I have a 69 barracuda in need of a good used full set of emergency brake cables. Mine are pretty rusty also need both ends that go on the axle, rear are drum. Please PM me Thanks Jay

I have a 69 barracuda with small bolt drum brakes. I am redoing the car and think this would be a good time to switch to disc brakes. Probably going to stay with small bolt pattern (if possible) Looking to see what is available used that would work to convert. I am in Ft. Myers Fl 33919 so...

Looking for a clean set of (driver quality) 69 grill surrounds Please pm me with estimated shipping to Ft. Myers Fl. 33919 Thanks Jay

I am looking for a nice 69 Formula S badge for the trunk finish panel. Would consider a reproduction if anyone makes them. I have seen the 67-68 but they are different Please send me a PM if you have one or know of someone that reproduces one Thanks Jay

looking for nice Barracuda fastback drivers door window with chrome molding, in clear. Also looking for clean windshield The closer to Ft. Myers Florida the better. PM or text at 239 738-4051 Thanks

I have a 69 340 and looking for end crank end caps I have #1 and #5 but need 2 , 3 and 4. Will buy a full set if needed. Thanks Jay

looking for the backward threaded lug nuts and Studs for drivers side 69 cuda need 5 studs, 10 lug nuts Pm me with what you have Thanks Jay

looking for a 14 inch small bolt steel wheel. Nothing special, but not too rusty. PM me

Looking for about 20 fender bolts,body bolts, can have surface rust(69 cuda) also need nearly all engine bolts (valve cover, oil pan water pump and intake and exhaust manifold) for 69 340 bought an engine completely apart with no bolts, prefer to assemble looking original or close to it...

WTB. clean set of 69 340 valve covers. Let me know what you got to sell Thanks Jay