Search results for query: *

Can anyone give me an idea of how much extra, if any, bump clearance may be gained using this arm?

Continuing along with my chassis repairs, has anyone used an AMD Firewall? If so, how did it fit?

Can anyone speak from experience regarding the fitment of either Auto Rust Tecnicians or US Car Tool torque boxes?

Anyone looking for a kit and free shipping PM me. I'm at Carlisle Sat only.

Alignment has always been a sore subject on our mopars. The eccentrics in the upper arms are often hard to access especially with a wide tire and don't offer the kind of adjustment range for modern specs. I've been using SPC upper arms for years now and corrected the one fitment issue they...

Just an FYI - Borgeson has come out with an updated version of their fast ratio steering box. Some key features of the new box - less expensive (about 100) and smaller than the previous unit. Unfortunately, they are only offering in small sector. I will be mocking up shortly and posting pictures.

Finally, I just received the first A body tilt column. This one is for 70-76, because it has the key on the column. Stay tuned for pictures, pricing and other details. Any interested parties PM me.

After doing many driving events and lots of driving, I've always felt the steering wheels on the market could use some improvement. I've found that 13.5" is the diameter that just feels right to me. This is a little smaller than the factory tuff wheel. I've tried all the repro tuff wheels and...

I want to hear FIRST hand who has had issues with the PST 1.03 torsion bars. These bars are not clocked leaving zero preload. This results with low ride height and no adjustment left on the adjustment bolts. Please don't get off track here, I need some evidence from people who have had this...

After playing with several types of springs for my Dart, I have a formula that works. The site for my shop Bergman Auto Craft is almost finished, where they will be listed. However, I wanted to share a profile shot of the Dart with the springs installed. These are 130 lb springs that have a...

Played with one of the dropped spindles for the Dart last night. As the picture shows tons of bumpstop clearance which should be nice. So far I've turned the t bar adjuster bolt 8 turns and I'm still to low! Even with 18" wheels, 5.5" is the max backspace which is a bummer as I was looking to...

Some pics of the new springs. A little lower than I was anticipating, but I will be measuring the anti squat angle and changing the front eye location if necessary. I have offset front hangers so I could not use the pieces provided by Hotchkiss. My current eye location is 3/8" above the location...

Just thought I'd share my personal procedure on alignments, since just did one on my Dart the other night. I start with accurate height checking on the drive on rack, after it's known that it's level. Then, I foucus on the rear, shimming the axle as necessary to make sure the toe is equal on...

XV Motorsports needs 2 cars for templating purposes (chassis reinforcement components), one 108" wheelbase car and one 111" wheelbase. (chassis reinforcement components). Preferebly cars with orig floors, and no chassis connectors. We will need the cars for a few days. During this time, the...

Anyone looking to do a nice chassis stiffness upgrade, I am in the process of doing this on my own car. This will provide a solid connection between the front frame rails, which can only improve squeeks and rattles, as well as improved safety. Anyone who wants pix, let me know.