Search results for query: *

I'm thinking about installing a cam in my '86 d 150 with a 318. I am considering this Summit kit. Engine is stock with a performer intake and Holley 600 and duals, what Y'all think? https://www.summitracing.com/parts/sum-k50052/overview/make/dodge

I have a 318 on an engine stand. This motor needs the crank changed because the harmonic balancer bolt hole is stripped. I have another crank in great shape. So question 1 is would it be acceptable to run a bottom tap in the hole and use a new ARP bolt? Secondly if I have to swap in the new...

I have a 360 with magnum head conversion. I'd like to use a comp xe-268 cam with lift of .477 intake and .480 exhaust with 1.5 ratio rockers. The Magnum has 1.6 ratio rockers. So the question is will there have to be machine work on the heads at the valve stem area to use this cam? Seems I heard...

I have a 318 with 273 4 bbl heads. The engine has a hyd cam. Would there be any problems using the rocker arms and shafts from a 360. I would rather use the 360 non adjustable parts because I can get a fairly new setup from a buddy. I don't see that I need adjustable 273 stuff with the hyd cam...

I've got a 318 that loses it's fuel prime after sitting for a couple of days. I have to crank it quite a while before the fuel is pumped back to the carb. It runs great after it starts. I replaced the pump, filter and hoses and still no help. I hate to grind on the starter. What would be a...

My buddy is finishing a valve spring swap on his 5.9 Dakota and we can't find the torque specs for the rocker arm bolts. Does any one have a manual handy? But please don't go to any great lengths to find the info as he can get the info at the library Monday. Bob

Where can I find the head bolt torque specs for a 5.9 Magnum engine? And do I need to use any kind of sealant on freeze plugs or just install them dry? Bob