Search results for query: *

To start with, every light on the exterior of my vehicle works. The problem I have is that when I push the brake pedal, my driver side parking lamp lights up (along with the LED light on my dash that is my turn signal indicator with my aftermarket gauges). I've tried to isolate the issue, but...

I installed my Sniper system last summer and I've been having some erratic issues. When driving the car coming off throttle, the car can either stumble or completely die. It doesn't happen all the time - sometimes it doesn't happen at all, but one time specifically I had to keep my foot on the...

I apologize for starting a new thread, but I've read multiple threads and can't quite find the information I need to troubleshoot my problem. I have the original '68 wiring with Trailbeast's HEI upgrade (this: http://www.forabodiesonly.com/mopar/showthread.php?p=1969609586#post1969609586). I...

My gas gauge hasn't worked since I bought the car and I decided if I was going to drive it, I needed it to work. I determined that the gauge wasn't bad by grounding out the wire before the sender and the needle moved. I figured the sender was bad so I ordered a new one and proceeded to install...

I went through and worked on all my front end lights today cleaning grounds, etc. to get the headlights, parking lights and marker lights to work. I was able to get everything to light, but one parking light is very dim. I put a new bulb in it, cleaned the contacts and used some dielectric...

When I try to start the car, I can hear the relay click/thunk, but nothing else happens. I've had my battery tested and charged and its supposedly good. I jumped the two posts on the starter relay while the key was in start; I got sparks, but the starter didn't fire. I grounded the NSS...

The engine bay harness in my '68 Barracuda was clipped and so I'm missing a plug and I don't know what it should look like. The two wires that were clipped are the two violet wires that should have gone to the backup light switch that obviously control the reverse lights. The wires were...

The alternator that came with my motor is a Duralast DL7014 pictured here in the vehicle it came out of (another '68 cuda, but it had a three wire system). Its a 50 amp unit - more specs here: http://www.autozone.com/autozone/parts/Duralast-Alternator/_/N-93xme?itemIdentifier=333476_0_0_...

When I bought my '68 Barracuda it had a 318 and 904 with the single pole NSS, but no wire connecting it. I'm swapping in a 360 and 727. I kept the single pole NSS but I still have no wire to run to it. From what I've read, it should be a brown wire coming from the starter relay, but this is...

I have a '68 Barracuda and the best I can tell, the polarity of my parking lights is reversed. They don't function as parking lights at all. In fact, the only way I can make them light, is to use the flashers or turn signals. If the headlight switch is in the parking light or headlight...