Search results for query: *

I need the trunk molding or trim piece. I really only need the bottom one but will buy upper and lower if I have to and the price is right. It does not need to be in perfect shape, but I already have one that looks like it has been swatted upside a guys head. This is my car with the piece...

Looking for a stroker kit for a 360 Magnum engine, internally balanced, or external is fine. Let me know what you have. JR

I MISTYPED, I NEED THE RIGHT SIDE I am looking for a passengers side window regulator on a 1968 Plymouth Barracuda fastback. I need everything but the glass itself. May be interested buying both sides if you have them in good shape It has to be a fastback Thanks ahead of time. This is the...

I am looking to buy a Diablosport Intune, the i1000 model to program my 2005 Ram computer in my 1970 Dart. I am looking for an unmarried unit (unlocked, ready to use), but will consider a married unit if the price is low enough because it cost $160 to have it reset. You can PM here or send me...

I am looking for a dent free and rust free right side (passenger) fender for my 1970 Dodge Dart. I need it shipped also. I am located in Laurens, NY 13796. I do not need the lenses, extensions or anything, just the fender itself. PM with what you have

I am looking for the 4 screws (3 short and 1 long screw) that hold the headlight part of the grill on a 1970 Dodge Dart. I need both sides. Or even if anyone knows where to buy a new set. Thanks.

I need an A904 transmission yoke that will accept a 1350 U-oint. The 1350 U-Joint is designed with a 1 3/16" cap diameter and the retainer clips go on the outside of the cap like this:

For those of you who mini-tubbed, and do not need this bracket, I do. I need a set of these brackets that you would have taken off. It is the brackets that hold the shackles in the rear of the leaf springs to the body/frame. I do not need the bushings or the shackles themselves, just the part...

Looking for a real cheap 2 barrel carburetor for a 1970 318 that is in GOOD WORKING condition. I am not looking for a core or a one that needs a rebuild. I rebuilt the carb that I have now, it ran great for a little while and now is leaking out the top gaskets and can't get it to stop, so I...

I need a set of shock mount plates for an 8 1/4, 8 3/4, or Dana 60. PM me with your price if you have any or respond here. I am not looking for expensive, show quality, part# showing pieces. Just something I can sandblast, paint, and put on. Thanks

I am looking for a 340 or bigger stout, complete small block with aluminum heads and roller cam for full or partial trade. I have a 500 Cu in big block from a 400 BB, it was bored 0.33 over with Keith Black forged pistons, 9.76:1 compression, 440source aluminum heads, Hughes roller cam, Eagle...

I am mini tubbing my 72 Dart. The guy that is doing the surgery recommends the aftermarket wheel tubs, he said it is easier and thats the route we are going. Anybody got some aftermarket wheel tubs laying around that they would like to get a couple bucks for? PM me here or email me at...

I need a spiral lock for a full floating .990" pin. My machinist or I had misplaced one. The one thing I never counted prior to sending everything to the machine shop and my engine came back with only 15 spiral locks. If anyone has one laying around, I can paypal or mail you a few bucks for it...

I am looking for a 2800-3500RPM Stall converter. I am a cheapass, so I do not want to pay too much. This is for a Big block 727. PM me or email me at jrlegacy23 @ Yahoo. com without the spaces.