Search results for query: *

Any recommendations on someone to rebuild/restore my 68 Dart GTS power brake booster?

So got the steering box rebuilt and new exhaust. Boiled, soda blasted, and rebuilt the AVS and now I'm on the brakes. I replaced everything on the brake system except the power booster and am using synthetic brake fluid. It seems the power booster isn't boosting. The pedal is hard to the...

I'm testing my check valve because of a high hard brake pedal on my 1968 Dodge Dart GTS 340. I understand that if I blow through the check valve from the booster side that if air goes through to the hose side that the check valve is bad. That's what's happening with mine and I'll assume that's...

After sitting on jack stands for 25 years I replaced the entire drum power brake system front to back with the exception of the PB Booster and wheel drums. Everything is all stock. I used DOT 5 fluid and had a problem sealing it up. I wound up using copper gaskets on some most of the fittings...

Ok, I replaced all my brake system from master cylinder to the brake cylinders. All new preformed lines, both proportional valves, the works. In trying to bleed the lines I find that I have leaks. The line to the rear axle leaks at the proportional valve. The line from the proportioning...

So, I'm slowly getting back on my 68 dart project and I was replacing the brake pads, cylinder components and realized the brake lines all around needed replaced. I got a complete set of pre-formed brake lines and got them installed. Since the original lines were really gunked up I'm...