Search results for query: *

Howdy folks, up for sale in this listing is the lock and key set as removed from a 1967 Barracuda Notchback. I do believe they fit all 67/69 A bodies, but they came from a 67 Notch. Included are the ignition switch, door locks with rods and clips, trunk lock with clips, and matching keys for all...

Howdy folks, cosgig here. Up for sale in this listing is a pair of full quarter panels removed from a 67 Notchback Barracuda. Of course they work for 68/69 if you drilled and cut the side marker holes. Here’s the details… first of all, I didn’t cut them, I got them in a deal with a bunch of...

Howdy people, cosgig here. Up for sale in this listing is a pair of wiper arms as removed from a 1969 Barracuda. I’m sure these are pretty straight across the board for a variety of years and models, but they came from a 69 Cuda. Details… nice shape, no problems or damage. Springs are good...

Howdy people, cosgig here. Up for sale in this listing is a set of 67 Dart GT exterior emblems. Here’s the details…. All 4 emblems included, the grille center, both front fender emblems, and the trunk panel emblem. All in nice shape, the fender and trunk panel emblems are in really nice...

Howdy folks, up for sale in this listing is a rear window and gasket correct for a 1966 Valiant 2 door Sedan. It may fit other years and models, but it came from a 66. There nothing wrong with either piece, although the gasket isn’t as flexible as new rubber, it’s not being reproduced. the...

Howdy people, up for sale is an OE one piece floor pan as removed from an early A body 63-66 Dart. I was going to use this for my Valiant, but am now selling the car, and also didn’t realize that it was for a Dart and is 3” longer in the rear footwell than a Valiant/Barracuda. Here’s the...

Howdy all, cosgig here. I have here for sale a passenger side grille assembly correct for 1966 Barracudas only, it will also fit a 66 Valiant, but is correct only for Barracuda. Here’s the details... This grille is in very nice condition, no cracks, breaks or damage of any kind. There is almost...

Howdy all, cosgig here! Up for sale in this listing is a pair of hood inserts correct for 1967 Barracudas! They'll fit 68-9 as well but are correct for 67 only! Here's the details... These are in pretty nice condition, some minor pitting deep down in the grooves, but overall they look pretty...

howdy all, cosgig here! Up for sale in this listing are a set of 4 bumper stabilizer brackets that were used on all 67-69 Barracudas! These go on the outside corner of each bumper and mount to the fenders and quarters to stabilize the bumper and keep it from vibrating! They are all in good...

howdy all, cosgig here! Up for sale in this listing is a set of 4 side market lights correct for all 1968 Dodge and Plymouth cars! These came off of a 1968 Barracuda, but I believe are correct for all 68's. Here's the details!!! 3 of them came from the 68 Cuda I'm parting out, 2 rears and one...

Howdy all, cosgig here! Up for sale in this listing is a set of Taillights as removed from a 1968 Barracuda! Here's the details.... They are in driver condition, the drivers side bezel has a broken spot along the lower edge, the passenger bezel is pretty nice! The lenses are decent, but there...

Howday all, up for sale in this listing is a set of nosecone PLYMOUTH letters removed from a 1967 Barracuda! All letters included, the L has one peg missing and the U does as well! All in decent shape, and there's an extra P! The price is $25, plus $7.15 shipping by USPS Small Flat Rate box! As...

Howdy all, cosgig here! Up for sale in this listing is the front Valence panel as removed from a 1967 Barracuda, although it is also correct for 68-9 Cudas as well!! Here's the details... It's pretty straight, a couple of small dents but easily repairable! No rust through, just a little surface...

Howdy all, cosgig here! Up for sale here today is one Rocker moulding as removed from a 1967 Barracuda! Yes, I only have one side, this was on the passenger side!! Seems this car has exactly one of every piece!! Here's the details... It's straight, has a couple small nicks and scratches, the...

Howdy all, cosgig here! Up for sale today is an Antenna Assembly as removed from a 1966 Plymouth Barracuda! I believe it is also correct for Valiant from 66, and also maybe 64-5 models as well, but it came from a 66! Here's the details... It's pretty nice, all there, mast is straight, needs a...

Howdy all, cosgig here! Up for sale here is the upper door and quarter window stainless trim as removed from a 67 Cuda fastback! I believe this is also correct for 68-9 Cudas as well! It is all in nice shape, no dents or damage, only some very light scratching, and both sides are included! The...

Howdy gang, cosgig here! Up for sale is a set of drip rail stainless as removed from a 1967 Barracuda Fastback! I think it fits 68-9 as well, but it came from a 67! Here's the details.... Both sides including the corner pieces, no dents but some very light scratching here and there! The...

Howdy all, cosgig here! Up for sale here today is a set of rear window trim correct in application for all 1962-65 B Body 2dr hardtop models, it was removed from a 1965 Coronet 440! Here's the details... This set is in beautiful condition, not a scratch or dent on it, shines nice, and...

Howdy all, cosgig here!! Yes, I know these aren't A body parts, but I thought I would list them here as well as the B body site!! Up for sale here is the front window and drip tail trim correct in application for all 62-65 B body 2 dr hardtop cars! It was removed from a 1965 Coronet 440! Here's...

Howdy all, cosgig here! Up for sale here today is the "Dodge" hood emblem correct for a 1965 Dart! I don't know if this emblem was used on any other Dodge, but I personally removed it from the hood of a 65 Dart! It is in very nice condition, not a single pit or scratch on it, and all of the...

Howdy gang, cosgig here! Up for sale here today is the center hood emblem correct for 1965 Darts! This emblem is in super nice condition, no cracks in the glass, no deterioration in the emblem face, the chrome is awesome, the mounting pins are not broken, and the offset bushings that align the...

Howdy all, cosgig here! Up for sale here today is a front bumper assembly as removed from a 1965 Dart! I believe this is a one year only bumper, and Dart only as well,'but I'm not positive of that! Here's the details!!... This is a really nice bumper!! It is straight, shines really well, and...

Howdy all, cosgig here! Up for sale today is a complete grille assembly correct in application for 1966 Barracudas. It is technically only correct for 66 Cudas, but will fit 66 Valiants as well! It will not fit any other year Valiant or Barracuda! Here's the details.... This grille assembly is...

Howdy all, cosgig here! Up for sale here today is a center grille fish emblem for 1966 Barracuda! It will only fit a 1966 Barracuda center grille piece with the round hole cutout!! It is in pretty nice condition, the chrome shines nice, there are a couple pits in the field of the blue painted...

Howdy gang, cosgig here! Up for sale here today in a passenger side grille insert correct in application for 1966 Barracuda only! Yes, it would fit into a 66 Valiant grille, but is correct only for Barracuda! Here's the details!!.... First, it's pitted!! It has pits throughout the outer rim...

Howdy all, cosgig here! Up for sale here is a set of rocker Mouldings and clips as removed from a 1966 Barracuda! These are correct for 66 Cuda's only! They are in pretty nice condition, straight, and no deterioration of the bottom edge at all, unlike most every pair I've ever seen! They do have...

Howdy all, cosgig here! Up for sale here is a set of rocker Mouldings as removed from a 1965 Barracuda! I believe these are also correct for 64 Cuda's as well, but were removed from a 65! They are in nice condition overall, but one does have a dent in it right where the screw hole is! Looks like...

Howdy all, cosgig here! Up for sale here is a pair of taillights as removed from a 1965 Barracuda! I think they are correct for 1964 Cuda's as well, but they came from a 65! As the price reflects, the housings are pitted, and the passenger side has a dent in it, so these are good for someone's...

Howdy gang, cosgig here! Up for sale here is a complete set of vinyl top Mouldings as removed from a 1966 Barracuda! I'm not sure if 1964-65 Cuda's even had this option, but it would fit, but it is correct for 1966 cars!! Here's the details... Virtually every piece of this assembly is...

Howdy all, cosgig here! Up for sale here today is a set of front windshield trim as removed from a 1974 Valiant 4 door! I'm sure it's probably correct for other years as well, andaybe other models also, but it's from a 74 Valiant! It is all in good condition save for one dent in the drivers side...