Search results for query: *

Can anyone post a pic of where the cowl's drain down to???? Thanks Steve

I know all of you will cringe at my question,But here goes--- Have any of you used eastwoods prepping components??? I'm NOT talking about paint,I'm talking about prep stuff--Body filler,Epoxy primer,Sealer,High build primer- What makes it Junk????? Not there equipment but there componets...

About to get in the heavy on our body work and need to buy supplies to block sand,Can someone inform me as to what and where I should buy for block sanding a resto project. Thanks Steve

Give me some idea's what to use,1st time for me to use--Thanks Steve

If we weld the inside of the floor pan in the passenger compartment can we remove the pinch weld in the trany tunnel or are we making a mistake,should we just pound it over?????? Thanks Steve

What's the best way to weld the little molding holes along my valiant front fenders and top of doors--Any tips?????? Thanks Steve

Ok guy's--Help needed,Don't want a argument here or start something I know everyone has a preference on this tool,First timer here and first time spraying,I'm at the point to spray epoxy on some parts on our valiant and need to purchase my first spray gun and at this point right now I'm only...

If my son and I start to remove the old finish from our car (sanding) as we progress on a daily basis and uncover bare metal can we use etching spray can primer to cover the exposed metal till we get enough to spray our first full cover????? Also can someone give me a good brand of air sander...

Looking for some rear quarter patch panels for a 68 Valiant--Thanks Steve

Does anyone know where to look for fiberglass trunk/hood for a 68 Valiant???? Thanks Steve

Will they interchange with no body work???? Thanks

OK--So I found some parts to pick up for my 68 Valiant on the way down to Indy on Thursday,The 68 has a big crease in one rear quarter hence the patch panel,I have never cut body work-How do you remove a rear quarter panel???? or do i cut a lot larger than i need--Ok and if I can cut it a lot...

So it seems most of the threads here about talk about sanding down a body to prep for painting,What about media blasting,If we media blast to prep what are the steps to prep AFTER the media blasting?? DO you do body repair BEFORE or AFTER media blasting--I ask because of a project I'm about to...

So--I have a new project to start on--68 Valiant,I have now a cheap Campbell--110 volt wire feed welder--Will this suffice for body work or not??? oh yes it has a gas cylinder is not flux core welder--Thanks Steve

Can someone help me please-I need front fenders for a 68 valiant post--What other cars are the same and years--Thanks again--Steve

Can some one show me the screws used to hold the turn signal lenses into a sharktooth grille,Do you use nuts on the back side????? Thanks Steve

I need a new set of squirters for my 70 Duster anyone know where to find just the squirters???? Year one has a complete kit but I only need the squirters--Thanks Steve

I need help guy's---I restored a 70 Duster the last 3 years and got to drive it a few months this last year,One thing that i have a major problem is with the side window's,They crank like your lifting 600 lbs and don't seal very good around the window opening,I did put new glass in from A.M.D in...

Car is 70 Duster--I can't get my glass adjusted correctly-Is there any tech articles out there with diagrams,I have new amd glass in the windows,Just had my doors aligned by a trusted body shop and can't get the glass to seal or much less go up or down correctly--Does anyone make parts for these...

I need to find the lower sill plate extensions that go on the lower rear side panels- 70 Duster-- [email protected] Thanks

Anyone install rear 1/4 windows in 70 Duster--It seems they don't fit right,What I mean is it seems they are not tall enough and when I put them in the opening the frame does not go up into the chrome rain channel to weatherize the top of the opening--Any help I would love--Steve

Looking for help finding 1/4 glass felts for my 70 duster -The part that goes in what you would call the piller,It wraps around window and then the whole assembly slides in the piller from the top before you rivet the window back together any help would be greatly appreciated Swifter