Search results for query: *

just recently I got a 78 dodge pickup it has a newer style mid 80's 318 it has the holley 2bbl on it and im pretty sure this trk had a carter 2bbl set up on it from factory. my ? is I have a set of the small valve J heads and was wondering if they would work on this along with a factory carter...

tax season almost here and Im getting another parts vehicle for my dart. awhile back I found a 71 demon non 340 car but has a 340/4spd/3:91's. it was however a factory stick car so it has everything to convert my auto over to stick I think acouple of questions though are 70-71 steering...

I went and looked at a 71 demon yesterday. its alittle to ruff for me to fix but has some parts. im going to keep the 340 and the 8 3/4 sure grip rear end, hood and front bumper. its not a factory 340 car. it does have a complete 4spd set up including the steering column, driveshaft, pedals, and...

when will the bad luck end? yesterday my dart almost burnt down, one of my field wire terminals decided to come loose on my altenator and completely fried my engine harness, while i was secretly in route to the tag office to get my tag renewed (expired since dec). my dart has been out of action...

just curious but what does a 18 spline A833 4spd go for these days i just aquired one out of a 68 GTX along with the bell housing and console shifter?

AMD is going to be making stock 340 valve covers. i've seen one yesterday, they are gonna use my car as the test mule for them. they want to install them on my motor and see if there will be any clearance issues with the baffles. after everything is done i get the 1st set for free for helping...

hey guys i just aquired a 70 gold duster from a old wrecking yard sorry no pics yet but had acouple of ?'s about it it only has one gold duster decal on the pass side fender and not the driver side did they come that way? also it has alot of dirt inside the cowl is there a way to get it all out...

hey guys i need to change the pinon seal in my 8 3/4 does anyone know off hand what size nut is in the center as this is my daily driver and all of my tools are in my storage unit. so i'd hate to have everything set up only to put everything back espeacially doing this outside its been really...

i swapped out my door hinges on my 2dr 72 dart today the hinges i used was from a 74 plymouth valiant 4dr the front ones of course no more slop and pop when ya shut them wasnt sure if any of ya knew them 4dr cars have great hinges very little wear im gonna fix my 70 aswell:cheers:

i was at my local wrecking yard gettin the rear end for my 72 and it sucked it was raining for the most part but i had to do what i had to do while i had the rims off i noticed little to none rust on the drums so i had to check further i pulled the drums to find out there was new shoes,spring...

im picking up my rear this weekend for my 72 dart and it has 15" rims on it they appear to be off of a truck i was going to run those with the 14" up front and poverty caps i was thinkin 205/70/14 up front or 215/70/14s but kinda lost on the rear. i dont want to overwhelm the rear wheel well and...

i wanted to replace the upper and lower ball joints on the new suspension i got and went to advanced auto they showed they offered 2 a cheap one and 10 bucks more for the MOOG stuff i thought to my self (self i could use the extra cash to buy paint and detail all this stuff out make it pretty)...

will a 4dr front seat bottom interchange with 2dr seat tops the bottom on my seat has some springs messed up and the 74 valiant i got the BBP stuff from has a great bottom part would i be able to swap tops so it will work like a 2dr seat should?

can someone give me a list of vehicles to look for that would have one for my 70 dart 360/904 gettin ready to put headers on it will V-6 dakotas have the same ?

well guys i started working back on my truck needin to do the brakes and exhaust , while tearing into the rear drums 10" i found a part missin it's the metal bar with the spring one one side for the emergency brake it sits right below the wheel cylinder i called acouple parts stores and they...

a friend of mine has a 95 cherokee sport and the windshild wipers dont work so far we replaced the motor and the switch the rear window wiper wasnt working either until we swapped these parts now it works great but still no front wipers and he doesnt really want to drive in reverse i've been...

i was thinking of ideas and figured maybe one of you guys out there might be able to use one or if someone else has an idea they could post it here heres mine is it possible to turn a 67-69 valiant into a convertable not just wack the top off but actullay make a convertable anyone else have...

well folks the time has finally come to put the EF8/FF4 on the dart the mrs said i can get it painted this income tax :cheers: the only thing is i cannot find a place that makes a ledger green tail stripe i looked on pheonix graphixs site and they have black,white,and the rare blue but what...

hey guys i need some help here im planing on putting some exhaust on my 74 D100 it has facktory exhaust manifolds on it and im wondering if front pipes from a 78-79 L R E would bolt up to them with no problems i was gonna go with headers but with the shifter on the column the headers are a bit...

in 2 weeks i'll be owning a 76 dodge d100 adventurer i'll post some pics the truck has hard a hard life by helping out the farmer but i think alittle care should bring it back to life its a short box sweptline two tone blue met with white 360 auto fully loaded i'll be the 3rd owner i'll be...

hi guys my brother found a 74 dodge adventurer swb fleetside 360/auto it had a small electrical fire under the dash by the fuse block in which we plan on replacing the dash harness i was wondering will other yr harnesses work say 77,78,79? there is a wrecking yard here that has a bunch of these...

after messing around with my timing and carb adjustments for weeks the dart decided to lay a 35 plus black mark !!! :cheers: still have to do some more tweaking but gosh that felt good the tire smell still lingered around for a half hour

i'll be getting a 360 soon thats in a mid 80's ramcharger and im planning on putting it in my 70 dart i need to know what all i need to change so far this is what i have , 360 car oil pan i'll be using the 318's oil pick up tube,318,340 motor mounts, 340 exhaust manifolds,the trans is a 904 do i...

well me and my wife decided to go out last night a local car club was having a cruise in so we went but nothing was happining so we went to the dragstrip test and tune was going on and we got there kinda early but to my horror there was only 1 old mopar there 70 challenger and that was it...

i went to a local wrecking yard yesterday and found this duster it is mostly complete besides motor and trans VS29L fender tag also says E58 for motor this car is clean there asking a thousand bucks for it i think that is a good buy what do you guys think i know its kinda hard without seeing it...