Search results for query: *

Looking for something other than the M/T valve covers I have. Preferably finned early 70’s. Thanks

A-body bars wanted, the kind with the built in shock plate. Thanks

must be in good to excellent shape, thanks

Looking for vintage finned valve covers for my SB. Not M/T since i have those on my engine now.

Looking for crank/rods/Pistons. 340 or 360 local only .... not paying to ship a crank. Whatcha got? Thanks Mike

Need passenger side E-body1971 lower control arm with sway bar tab for 71 challenger. 71/72 B Body lower arm will work also. Thanks

looking for one or two of the big rubber plugs that are right by the torsion bar mount. they don't have to be pretty, i/m slitting it up to run a O2 sensor through. 60502 is where it would ship. i have PP Thanks

Looking for pump nozzles and pump cams, might also be interested in jets and other hard parts like float adjustment screws, etc.. Only want clean lightly used, nothing worn and beat. Thanks please PM. Mike

need the shield that covers the 4 vent fuel lines, just behind the rear DS wheel. Thanks FABO

Kicking around the idea of running a low rise dual quad setup on my 383 RR. Anyone have a complete or somewhat complete or just carbs 500 cfm???? Or should I tell my wife about this idea so she could kick me hard first ! Lmk what you have. Mike

anyone have a pair of these, would rather have the older metal type without the stepped hose end. LMK

Need one in nice condition, PM with details and price. Thanks Mike

wanted, would like a complete set minus the air cleaner, but will consider parts. pm me here. Thanks FABO

Looking for a black with the horn ring RR/GTX steering wheel must be in very nice shape. $$$$ for a nice one. PM me please. Thanks FABO

Looking for a nice original trunk mat, doesn't have to be perfect but has to be fairly clean and not ripped, have a new Y.O. mat if you want a trade. P.M me.. Thanks

Wanted rust free & very straight front fenders, also a rust free, very straight trunk lid with wing cutouts. Chicago area. Thanks

Looking for two short, 1971 seat belt retractors, black preferred. they look like the one in the pic but should be shorter. Thanks FABO PM me please with what you have.

* need a nice not corroded T-stat housing * spread to square carb adapter * New 4.10 ring and pinion 742 case * 71 340 w/p & crank pulleys with p/s * 71 demon standard door panel black driver side * 71 340 manifold plug (see pic) Thanks FABO, please PM with anything you might have...

looking for jets for the 71 t-quad or a carter strip kit 10-110 $$$$$$$$ yes i know.. LOL. PM please thanks Mike

* driver side 340 exh manifold date 7/8/9/10 of 70 i have one for a 69 for posible trade. * mint or new repop rally dash bezel 71 demon duster. * day/night mirror 71 demon/duster. * black drivers door panel must be very nice. * 4.11 ring and pinion for 742 case. * 71 340 idle solinoid...

AVS 4639 with a date of D-9, PM me Thanks

Let me know what you have and how much, pm is best for quick response. looking mainly for stock engine and underhood parts and interior parts and trim.

Mopar brand never used, with two used 600 v/sec carbs and two small chrome air cleaners, no linkage. its my buddys and he is thinking of selling he wants $425 + shipping. pm me if interested and i can maybe get some pics when i see him. Please only folks that are serious. Thanks Mike

Looking for mainly secondary jets 72 and later style, dont care what size, one on my carb has a crack on threads, would also consider the primary and sqirter and rods also. let me know if you have an unusable frozen carb to harvest these off of. thanks Mike

looking for one with a factory cooler, have 340/demon stuff for trade if that helps. i'm in Aurora,IL Thanks Mike..

Looking for a stock 70's air cleaner to modify, must be 4 bbl, ok if its got a few dents and rust, i'll be cutting it up to modify, pics and $ to [email protected] Thanks FABO shipping would be to 60502 Aurora,IL

Just wanted to see if NE1 had a new, or fairly new ones laying around they could part with before i order one. PM me Thanks Mike

Looking for some black seat belts, i have a incomplete set and need a few more belts to complete, need the front i think bench or buckets will do. should be in good condition. send pics and price to: [email protected] Thanks FABO

Looking for this type of stud with the 3 grooves for my carb, let me know if you have an extra you can part with. thanks Mike [email protected]

Need a p/s cap for the Federal style pump (round neck) must be in nice condition. thanks Mike [email protected]