Search results for query: *

super nice, hardly used Victor 340 intake in perfect shape. It will be shipped in a correct/padded intake box as well. I can do paypal and ship it total for $275. water neck not included. compare to a new one here over $100 more- Edelbrock Victor Intake Manifolds 2915

For sale- Almost new aluminum radiator- big block Mopar inlet/outlet; 26". Made by Alumarad. High quality 1" tubes, cools better than 3 core with smaller tubes, plus gives you the added space to add electric fans and not hit the water pump. I had this installed in my car for 2 weeks, then sold...

For sale- Almost new, used last summer; going to a 440 setup. This includes the Torqstorm Supercharger for a small block Mopar, all the pulleys, carb hat, piping, blow-off valve, etc. includes all paperwork and instructions. This blower can support up to 700hp, puts out +/- 8# of boost with the...

I have a time capsule 225 Cu. In. 2-bbl Slant 6 engine & 3-speed manual trans still running in the car like a swiss watch. Mileage is a true 28,967. The engine is super clean and complete top to bottom. Includes everything, even the radiator and hoses. Just tuned with new plugs, filters, oil...

For sale: 1971- 340 complete engine from a 72 Challenger. All original, standard bore, forged crank (great for a correct restoration). Includes factory air cleaner, TQ carb (6-139S), exhaust manifolds, power steering brackets and saginaw pump, 340 windage tray and 7-blade clutch fan. I don't...

Came with a hemi I purchased. These fit 67-72 A-body V8 K-frames only. $110 shipped to you.

brand new in the box FiTech EFI "Meanstreet" version which supports up to 800HP. Not for boosted applications and controls fuel only. Timing manually as usual. Click on the link for the website and info. Message me here, thanks! Save almost $200, price is $900 shipped to you. Paypal as friends...

1970 340 exhaust manifolds E-body Challenger Cuda in excellent condition SALE PENDING UNTIL 3/27 1970 e-body original air cleaner with 340 pie plate & black wrinkle finish- excellent condition SOLD SOLD SOLD 1969 date code Mopar starter in good, clean working condition $75 1970 340 original...

I have a brand new powdercoated Tanks Inc. fuel injection ready gas tank that will allow you to run 3" tailpipes inside your A-body frame rails. With a little R&D, I came up with installing a '68-70 Charger 19 Gal. tank that's 5" narrower than an A-body tank. It's longer front to back and still...

Fresh Magnum 360 roller cam block- bored and honed 30 over with torque plates, align honed mains & zero decked. Oiled, painted Hemi orange, bagged and ready for assembly. Includes polished 360 crank (std/std), new brass freeze plugs, cam bearings, magnum timing cover, pushrods, hydraulic roller...

Brand new in the box Meanstreet FiTech EFI throttle body system that supports up to 800 HP. This unit is for fuel only, no timing control. Has 8- injectors and it's own regulator. Read about it at the Fitech website link below. $995 shipped to you! PM me here, thanks. Located in Sun Prairie, WI...

brand new Powermaster alternator- Mopar upgrade one-wire (internal regulated) 165A. Puts out 100A at idle/ 145 at cruise/ 165 top. Includes spacer bushings to mount like original alternator position. These retail for $270- summit part # PWM-8-48529-120. Grab this one shipped to your door for...

Hughes racing two piece valley tray Part # HUG-3271MA for any 383-440 B/RB engine. Used for dyno session only on a 383. These are meant for single-plane intakes. Hughes instruction sheet included. These sell for $60. Grab this one for $45 shipped via USPS. PM me here, thanks!

March Power steering pulley for a Federal pump with 5/8" press-fit shaft. This will not fit Saginaw pumps nor keyway shaft- make sure you know what you have. Save some money here- $55 shipped via USPS priority. PM me here for details thanks.

brand new 10* Ti retainers as removed from new Trick Flow cylinder heads. these are for a dual spring 1.50 OD Listed on Summit for $220. Grab these for $125 shipped. PM me here for details, thanks.

brand new FiTech EFI fuel command center EFI pump. Filled with fuel, drained. Changed direction with the car project (went with in-tank pump). You will need the (-6AN fittings and line to carb. Includes the main pump and brackets in original box with instructions. Don't wait for FiTech and the...

brand new Gerst Suspensions upper A-arms with adjustable hiem joints and new ball joints. These will fit any '73+ A body spindles, B-body or E-body (large ball joint). $275+ shipping. PM me here for info, thanks. Located in Sun Prairie, WI.

These will fit any Mopar rear end with the sealed Green axle bearings. SSBC 10" rotors, pads, calipers and brackets, dust plates too. All parts are in great shape and alot of life left on pads and rotors. They were very true wearing- bolt on and go! PM me here for info, thanks. Located in Sun...

like new Indy single plane intake manifold for a 383 or 400 BB. 4150 square flange. Not ported or any mods. $200 + shipping. PM me here for info.

Billet aluminum air cleaner with fluted top. Includes the K&N element. Measures 8" x 15" x 2-1/2". Has standard 4150 4-bbl flange. This is a raised flange (1/2") to clear all linkage- not a drop base. These retail for over $100; $60 shipped to your door.

Brand new QF bypass regulator. I've installed new -8 AN fittings & carb line as well. Recommended to use same size inlet & return lines. retails for $75; $55 shipped to your door. https://www.summitracing.com/parts/qft-30-900/overview/

Brand new dual feed carb lines. Braided steel (-8AN inlet). Has port for a guage too. Standard Holley/ QFT fitment. This is nickle plated. retails for $64; $50 shipped to your door! https://www.summitracing.com/parts/sum-220100n/overview/

Brand new (mounted only) Heavy duty chrome 6-blade fan. Measures 18" diameter. Has 4 HD rivets per blade, not a cheap flex fan. Standard rotation, rated to 10,000 RPM. Retails for $75; $50 shipped to your door.

Reproduction crank pulley from 440Source. I believe this can be used on either small or big block engines. Single groove V-belt. Brand new. Retails for $50; $30 shipped to your door

Carter high volume steet/strip mechanical fuel pump. Excellent condition. Just removed & parted the engine out. Bolt on and go. These require a fuel regulator. $50 shipped to your door.

Original OE Barracuda trunk emblem in above avg. condition $15 OE Fish emblems for hood $20 each; (2) of them Formula 'S' fender emblems in above avg. condition. Not show worthy, but excellent driver. Would need the colors reapplied. $40/ pair PM me here for details, thanks.

Hemi 8 bolt flexplate from B&M. SFI is expired. Excellent shape. Has dual bolt pattern. $65 shipped to your door

Brand new Ti retainers 10* removed from Trickflow heads with dual springs. 1.50 OD; .690 ID Summit link https://www.summitracing.com/search?SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=TFS-214T0420 Buy these for $160 shipped to your door USPS priority.

I decided to go to coilovers so these new parts are up for grabs. Brand new in the box (A-Body) Firm Feel HD .940" Torsion bars. These would be a step up for big block, or 2 steps on a small block. Not so big they are going to interfere with your headers. These were $325. I will sell them for...

For Sale- Hooker super comp headers for a 67-76 A-body. These are ceramic coated 1-5/8" to 3" collectors. Driver's side goes around torsion bar/ has slip tube. A couple dings on the bottom but overall really nice. Selling for 1/2 price of new; $200. + shipping from Sun Prairie, WI. PM me here...