Search results for query: *

Well I've wanted a more serious head for my 367 and I'm not sold on Eddie's so I found a deal on NIB 59* W9 heads and I got them. They are bare and I'm really not even sure what valve size they use, my motor is fresh so I plan on letting these set around for some time so I can acquire parts or...

So my very young motor is apart because when the trans came apart it cracked an ear off of the block. Since I'm having a new block machined I had to tear down the motor and I found some rod bearing material. All clearances were spot on, the bearings weren't tight so I have to believe this was an...

Where do you guys get the spring height requirements with stock heads? I'm putting a motor together and kinda ran into trouble here so what do you guys do that's still simple?

I just picked one of these Professional Products dampers up cheap and I'm wonderin if any of you have used them and if anyone can tell me which of the two counterweights I need to use with a 360, thanks much I hope it works out to be as good a deal as I think it was lol

So I've got a 70 340 block that was at .030 and needs to go .060 it was kinda hard finding decent pistons at the 4.1" bore so my machinist and I got to talking and I'm thinking a scat 4" cast stroker kit will do just fine, my rods are good bushed stockers and it should end up with 9.5:1 Diamond...

My dad is putting together a '69 340 for his cuda and would like to run a solid roller cam. The car will be a street/strip cruiser with right at or a lil over 10:1CR forged Diamond pistons. The block has just been bored and decked and now we need to set it up for the solid roller cam. he's...

What would be the right timing cover for a 70 340 motor? Should the timing marker be on the driver or passenger's side?? We got one with the motor but it doesn't have the indicator on it at all (wtf?) Thanks.

I've got a deep pan for my 340 and no pickup tube, it's about 2" deeper than stock and I'm wondering what I need to use for a pickup tube, can I use a stock one?? Also it doesn't have any baffles in it, anyone suggest I weld some in? and where? Thanks much

Well one day I lost spark and oil pressure in my 360. Pull the dist. out and I find out that the gear on the shaft that drives the dist. and oil pump is totally chewed and shot and the cam gear shows a wierd wear pattern. My guess is that the cam was walking, right? My motor has less than 6k on...