Search results for query: *

getting close on my Dart I need the bolt and nut that holds the brake pedal pushrod to the brake pedal arm and also need the brake push rod (kelsey hayes 4 piston set up) I seem to have misplaced this hardware

Got a 70 Dart with the KH factory 4 piston setup. I need the hoses for both sides (new please) NOT the feed hose from the master cylinder but the hoses/lines that feed from one side of the caliper to the other I would be willing to buy them from a member or if someone can tell me where I can...

I dont want to have buy a rebuild kit to get the plastic piece that locks the pushrod to the plunger on my master cylinder on my manual front disc 70 Dart Anyone have a spare they would be willing to part with

Im almost finished with my Dart and need a few small items: 1. Set of seat belt hold down bolts 70 Dart 2. A set of new hoses for my Kelsey Hayes stock calipers 3. knob for my stock am radio 4. Seat release knob cover drivers and passengers I would appreciate any help. PM me with what...

650 double pumper need two of the long bolts that hold the fuel bowl on

Would prefer a local pick up, central fl area. Need block w/ main caps only, going to all forged 408 may travel a couple of hundred miles to get it...

I need a fan spacer anything from 1 3/4 to 2 1/4 will work, trying to get my fan closer to the rad , std mopar 4 bolt, aluminum water pump. whatcha got??? Before I commit to buying one, can someone tell me what the minimum amount of space should be between the fan and the rad????

I've searched all over for a set of chrome stamped steel style magnum valve covers. There are plenty of aluminum ones out there but I can't find inexpensive chrome covers anywhere. I would consider a set of aluminum used but even those are hard to find and very expensive. Any one have a set...

70 Dart, factory KH front brakes completely rebuilt with new rotors,, factory sway bar., KYB gasajust shocks all around, MOOG offset bushings for A frame, front suspension COMPLETELY rebuilt , V8 torsion bars, new V8 leaf springs (not 340), front of leaf springs clamped, adj. pinion snubber, new...

Need to be at least driver quality, do not have to be perfect but still look nice. I have the arms but need the blade holders.

Need a set of #1966 Thermoquad metering rods

Need the correct spacers for a 70 and up alternator set up, have the brackets, need the spacers(aluminum water pump)

Need a complete taglight assy with pigtail 7o Dart rear bumper

I've been trying to source the oil plug that is threaded that screws into the block that the oil filter screws onto and the seal that goes behind the plate that the oil fliter seal goes up against, ideas???

Would like it to be as complete as possible..................and of course reasonable , cosmetics not important I plan to totally chrome it

92-2000 Block preferred. Would like to pick up in a 100 mile radius of 34731.

Need one spider gear for a 742 case sure grip. Bought the chunk it was supposed to be ready to go and find that one gear has a complete tooth missing!! I have only been able to find complete sets new for sale at 250 bucks. Could someone help me source ONE new one or perhaps one of you have a...

Started on the wiring on my Dart couldnt get instrument lights for anything.....pulled the instrument cluster and discovered that there are no bulb holders on the back of the instrument cluster......sure could use some any one got some for sale????? Need eight holders. If you have a cherry...

Going with 70 and up throttle bracket and kick down arrangement need the original style throttle bracket that bolts to the base of the carb.

Having a hard time finding these, any ideas guys? Wheel vintiques used to have them but I wasn't able to find them on their redone website.

There are 4 bracket pieces on the saginaw pump p/s bracket on 70 and up small block p/s set up. I have all but the one that is a perfect triangle with 1 hole near each corner. Would greatly appreciate any leads on getting this piece. I can't see paying 75.00 to buy the whole kit to get one...

A buddy of my who is a class racer is looking for a set of bare 308 heads Surfaces must be UNCUT and passages NOT PORTED. Bad valve seats and bad guides OK.

Driver quality or better please.

Buy, beg, borrow , steal, rent..... they are discontinued no longer available

For small block, big block looked different.Need the one that bolts to the base of the carb, for 4 barrel. I'm going from /6 to 360 Magnum with a carb. I want to use the stock kickdown (early 70's vintage) I have if possible.

Casting numbers for the ones I want are 53006619 and 53006618. I believe that they were produced for 1992-1993 only. There may be other magnum manifolds that have 2 1/8 outlet and if you will give me their casting numbers I will look then up and see if they will work. The 53010187 and 53010186...

wtb 70 Dart parking light lenses in driver quality shape

WTB an "early" set of 318/360 MAGNUM exhaust manifolds with the large outlet- from 92-93. Casting numbers are 53006318 and 53006317. Outlet is 2 1/8 . Thanks

Im looking for the bulkhead terminal connectors engine side I believe they are packard 56's discovered that I had a brand new under the dash harness installed so I am going to get some bulk head connectors for the engine side and rebuild from scratch the engine harness.

Looking for stroker crank for 360 brand not important looking for something to polish and put in used ok but not interested in having something turned. Would consider a new one if I could get a deal. Anyone know of the cheapest one out there.