[WANTED] 10 1/2 cast bell

[barbee6043]

for 64 B body for 130 tooth fly and 4.354 input. For big block. 833

 

[cudamark]

Cast iron one for an 833 I presume?

 

[barbee6043]

yes for 64 B body 130 tooth flywheel, 4.354 input collar. yep A833.

 

[tb3cuda]

big or small block,might want to post the part number if you have it.

 

[cudamark]

That might a bit tough to find. Technically it's '64 only with a big block (not a 426), though you should be able to make the '65 version work....not sure what the difference is. For a small block, you're on your own as they didn't make one that year (or '65) with the 10 1/2" clutch. Using a later one would require modifying clutch linkage and maybe a different clutch fork and/or pivot.

 

[barbee6043]

Yes for Big Block, sorry but I have no cast number, Actually I bet the 65 would be perfect.
Brewer has them, just looking for one a little less expensive!

 

[toolmanmike]

#2402683
1963-64 361/383

 

[halifaxhops]

@mobileparts

 

[barbee6043]

#2402683
1963-64 361/383

But does that take the T10 or A833>?

 

[toolmanmike]

But does that take the T10 or A833>?

The book doesn't say.

 

[cudamark]

#2402683
1963-64 361/383

Nope, that's for a 3 speed.

 

[cudamark]

The 833 didn't start until '64, so, I have my doubts about anything '63 and earlier working.

 

[Rick@Laysons]

Casting# you need to look for would be 2463019.....1964 B-body ONLY... 361/383/413/426 wedge

VERY RARE and VERY EXPENSIVE......IF you can find one!!!

 

[barbee6043]

Casting# you need to look for would be 2463019.....1964 B-body ONLY... 361/383/413/426 wedge

VERY RARE and VERY EXPENSIVE......IF you can find one!!!

I have no concern as to the correct number as long as I have a bell and fork, etc. that works on my 64 Savoy. Probably just go thru Brewers that way I know what I buy will work. 10 1/2 in. cast bells are always cheaper and easier to find that 11 in. aluminum.

 

[barbee6043]

Still looking