11 inch ptc converter?
- Thread starter mod38-1
- Start date
-
T67POWER
Well-Known Member
- Joined
- Sep 30, 2009
- Messages
- 669
- Reaction score
- 9
I had them build me a transmission and convertor package.
The 904 did not shift right and the stall speed was way to tight.
It had a problem and they refunded my money.
I sent everything back and went with a dynamic transmission and convertor.
Frank lupo's dynamic transmission.
My buddy run's a ptc trans. and convertor and has had no problems.(nova)
I have used two dynamic convertors with no problems.
I think frank lupo knows mopars better then most shops.
GOOD LUCK8)
The 904 did not shift right and the stall speed was way to tight.
It had a problem and they refunded my money.
I sent everything back and went with a dynamic transmission and convertor.
Frank lupo's dynamic transmission.
My buddy run's a ptc trans. and convertor and has had no problems.(nova)
I have used two dynamic convertors with no problems.
I think frank lupo knows mopars better then most shops.
GOOD LUCK8)
fishy68
Tyr Fryr's Inc.
Yep. Got one in my 68 Cuda. I had very little money when I bought it so I took a chance on it and surprisingly enough (for the price) it works great. Build is a 360 that's fairly torquey and putting out about 375 hp. Car weighs 3650 with me in it. 3.55 gears. The converter is rated at 2800-3000 stall and it stalls right at 3000. Nice cruising converter too. Very little slippage. Ran a 13.58 with it last fall shifting way early (didn't have a tach in it and thought I was shifting higher). I think if I would have just rapped it out a little more it would have gone in the low 13.40's.
-
