EddieSketti
Well-Known Member
These 1555 Hughes rockers are just what the doctor ordered to fix valve geometry and a solid valve train.
wasn't digging the prw stainless ones i originally got that clearly say from chinaI agree. I have them on my roller 408. Sure beats the guides with the standard chivvy style rockers.
that was the other reason i dint go with those PRW and i couldn't get my proper lift with my cam. now I'm right there and then some LOLI could never get both rockers correctly over the center of the valve stem with the guide style rockers. These bolt down and are centered correctly.
Bookmarked. Thanks for the tip.These 1555 Hughes rockers are just what the doctor ordered to fix valve geometry and a solid valve train.
View attachment 1715647785
depending on your cam lift you might have to shim up. my lift was .565 and shimmed mine .100Bookmarked. Thanks for the tip.
big thanks to member DODGELAD who sold me these Barely used and half priced .These 1555 Hughes rockers are just what the doctor ordered to fix valve geometry and a solid valve train.
View attachment 1715647785
can't say enough about this web site and all the info about everything and I'm always going to check first before i order partsbig thanks to member DODGELAD who sold me these Barely used and half priced .
I been waiting all day for that reply LOLWe'd love to see a picture of your valve tip swipe pattern
What didn't you like about the PRW stainless rockers? That they were from China, they required a bit of setup with shims to center on the valve stem? Anything else?wasn't digging the prw stainless ones i originally got that clearly say from china
What didn't you like about the PRW stainless rockers? That they were from China, they required a bit of setup with shims to center on the valve stem? Anything else?[/QUO
lost all my valve lift couldn't get them centered and have my .565 lift and proper valve geometry just saying. the 1555 were magic LOL granted they are 1.65 vs 1.6 but worked out good for meWhat didn't you like about the PRW stainless rockers? That they were from China, they required a bit of setup with shims to center on the valve stem? Anything else?
to me the 1555 are the best of both words between la rocker set up and magnum set up almost like a hybrid half la half magnum LOLplus seemed way more stable then the 1550's and didn't need to buy a jomar stud girdle