[FOR SALE] 1966 Barracuda Parts Car

[Dutchrebuild]

Still parting out this car...
Things I know I don't have:
V8 gas pedal and engine mounts
Grills
Console
Bucket seats
Driver's fender

Things I know are there:
Rocker moulding
A very nice complete dash assembly
Wheel lip moulding, and a whole **** load of other parts for a 66...ask!
Would consider selling the whole mess as well for reasonable
Car located in 14111

 

[moparlvr166]

I'm interested in the gauges sitting by the glove box and the valve covers on the L/F floor area.
If you can send me better pictures. Thanks Ed

 

[Dutchrebuild]

Here

 

[moparlvr166]

I will pass on the gauges, Question on v/covers, can you find the missing fin and is the other cover bent at the center area or just angle of picture?

 

[Dutchrebuild]

Fin gone...valve cover is smashed in on the stove pipe

 

[moparlvr166]

Thanks for the info, I will pass, I see it has a clutch pedal, does it have floor shifter?

 

[cosgig]

Make sure you save the A pillar mouldings, the rear window interior plastic pieces, the rear seat hinge covers, the drivers side fresh air box, and the plastic trim pieces at the front of the big rear window. All those pieces are a good sell if not cracked or broken, and be very careful getting them out.

 

[No name needed]

Pm sent.

 

[MOPAROFFICIAL]

I'm interested in the blue/turquoise steering wheel

 

[Dutchrebuild]

Wheel is from a 65...all cracked up

 

[66340SEDAN]

How much for the beat up 273 Commando valve covers? Also how are those 1966 Valiant tail lights that are in the parts like inside the car? Thanks

 

[Dutchrebuild]

66340sedan your inbox is full... PM me if interested

 

[Rick Covalt]

I am interested in the clutch pedal. Not the whole assembly with brake pedal...etc. Let me know how much. Thanks

 

[Dutchrebuild]

Pedals are gone

 

[dartman 440]

any pics of the grill pieces ?

 

[Dutchrebuild]

Don't think I have any

 

[tone]

How about the drip rail moulding? Looks to be in decent shape in the photos ...

 

[Dutchrebuild]

Probably good...plus I got a 65 out back that still has them

 

[Dutchrebuild]

Still available

 

[65TerrorCuda]

How about the horn contact plunger (right inside the steering column, white plastic, has a little brass wheel on it)?
To 87107

 

[Dutchrebuild]

Sold

 

[dartin jack]

I’m in Ontario north east side of the lake if you still have the complete dash assembly let me know the price thanks Jack

 

[Dutchrebuild]

The complete dash is sold

 

[65TerrorCuda]

What axle? A few ppl looking for 7.25 parts/assemblies

 

[Dutchrebuild]

Has a 7.25 in it...I also have other 7,25 rears laying around