1966 instrument panel screws

[kfishlock]

Good evening,

Can someone show me the correct outside screws for a 66 Dart instrument panel? Can you point me to a source? My Dart has some Home Depot type wood screws holding the dash together!

 

[Dave999]

raised head, counter sunk, phillips, self tapping

thats usually what mopar used.... can't tell from your photo

ebay or any local fastener supplier

 

[cosgig]

Fillister head screws is what you’re looking for.

 

[kfishlock]

Fillister head screws is what you’re looking for.

Thanks, that’s the answer I was looking for!

Keith

 

[Dave999]

fillister has a squared off side to the head...is that what is used there? if so i learn something new

cylindrical head with a dome to the top and a slot or cross depending on spec

like this
https://www.accu.co.uk/fillister-sc...e8ApBWQaAkB_EALw_wcB#sirv-viewer-959293495617

whereas in my interior, where the screw head is visible i have nothing more interesting, my interior is just full of these
(and everything is a self tapping screw)

https://www.accu.co.uk/phillips-sel...TJtQWkaAm4BEALw_wcB#sirv-viewer-1201618659692

can't find a fillister headed self tapper, only pan head which is like a low sided fillister head

Dave