chickendeluxe
Well-Known Member
Solid 67 original 273, console auto Barracuda convertible.
Red w Black from Factory.
I replaced Floor and added US Car Tool Connectors.
Added 4 speed Hump and leveled correct 4 Speed Console.
Have Console 4 Sp Shifter and pedals.
Set Up for 340 4 Speed.
Engine Trans available or may Separate.
Car is Cut in R4 Red....Trunk, Door Jambs, Engine Bay.
Undercarriage Undercoated with Raptor Liner.
8 3/4 Blasted and Painted, with 323 489 Limited Slip with Moser Axles, 10.5 Drums
Big Bolt Across with later Pin Type Calipers and rebuilt Front end.
Fenders off car for Final Prep. Doors Hung and Cut in.
Grilles are getting restoration finished.
Original Core Buckets and rear seat. Good Read Door Panels.
Top worked great and I have Not removed.
A bit shrunk.
$18000 with warm hydraulic Cam 340 and good A Body trans, Resurfaced Flywheel, Clutch Assembly, Bell, Linkage, Rebuilt Super Shiter and Rechromed Console Handle with Console.
$12G less those Parts Rolling
Photos Coming
Red w Black from Factory.
I replaced Floor and added US Car Tool Connectors.
Added 4 speed Hump and leveled correct 4 Speed Console.
Have Console 4 Sp Shifter and pedals.
Set Up for 340 4 Speed.
Engine Trans available or may Separate.
Car is Cut in R4 Red....Trunk, Door Jambs, Engine Bay.
Undercarriage Undercoated with Raptor Liner.
8 3/4 Blasted and Painted, with 323 489 Limited Slip with Moser Axles, 10.5 Drums
Big Bolt Across with later Pin Type Calipers and rebuilt Front end.
Fenders off car for Final Prep. Doors Hung and Cut in.
Grilles are getting restoration finished.
Original Core Buckets and rear seat. Good Read Door Panels.
Top worked great and I have Not removed.
A bit shrunk.
$18000 with warm hydraulic Cam 340 and good A Body trans, Resurfaced Flywheel, Clutch Assembly, Bell, Linkage, Rebuilt Super Shiter and Rechromed Console Handle with Console.
$12G less those Parts Rolling
Photos Coming
