1969 Dart 2 door rear side window glass install

[nothingbutdarts]

Glass was pulled long ago, I screwed the bolts in when I pulled the glass. The bolt has a big washer and there was also a round plastic piece on the bolt, is there supposed to be 2 round plastic pieces one on each side of the glass? Or if just one plastic piece, does the plastic piece go on the other side from where the bolt & washer go thru the window?

Thanks!

 

[cudamark]

There shouldn't be an metal against glass anywhere. All mounting areas use a soft gasket of some sort.....some rubber, some plastic, some more of a cardboard material depending on year, type of fastener/bracket, and location of the glass.

 

[Dana67Dart]

Photos are your friend!

 

[nothingbutdarts]

^ ^ ^ ^ ^ ^ Photos will have to come when there is daylight.
Dana, I looked for your Dart at the cruise today, didn't see it. I was hoping to visit with you.

 

[Dana67Dart]

Dana, I looked for your Dart at the cruise today, didn't see it. I was hoping to visit with you.

Did not go today


Will be there in October for sure

Would have been fun to catch up.

 

[nothingbutdarts]

Seems a plastic milk container will do the trick.

 

[etngeorge]

There is a fiber washer on each side of the glass and a rubber sleeve over the bolt. I think the rubber sleeve is for anti rattle purposes(fills gap between glass and bolt). I used some anti seize on the bolts. Had one that was corroded and broke during removal.

 

[nothingbutdarts]

Had the broken bolt happen on another Dart.